Denon AVR-E400 Owner's Manual

Also see for AVR-E400: Getting started guide Service manual Getting started Quick start guide

Denon AVR-E400 Owner's Manual Manual pdf 113 page image

110VideoOn Screen Display Default settings are underlined.Select the on-screen display user interface preferences.Setting items Setting detailsVolumeSets where to display themaster volume level.Bottom : Display at the bottom.Top : Display at the top.Off : Turn display off.When the master volume display is hard to see when superimposedtext (closed captioning) or movie subtitles are present, set to “Top”.InfoDisplays status of operationtemporarily when the soundmode is changed, or inputsource is switched. Youcan set whether or not toshow each of these statusdisplays.On : Turn display on.Off : Turn display off.Now PlayingSets how long each menuis displayed when the inputsource is “NETWORK”,“iPod/USB”, or “TUNER”.Always On : Show display continuously.Auto Off : Show display for 30 seconds after operation.TV Format Default settings are underlined.Set the video signal format to be output for the TV you are using.Setting items Setting detailsFormat NTSC : Select NTSC output.PAL : Select PAL output.“Format” can also be set by the following procedure. However, the menuscreen is not displayed.1. Press and hold the main unit’s ZONE2 SOURCE and STATUS for at least3 seconds.“< NTSC >” appears on the display.2. Use the main unit’s SOURCE SELECT 0 1 and set the video signalformat.3. Press the main unit’s STATUS to complete the setting.NOTEWhen a format other than the video format of the connected TV is set, thepicture will not be displayed properly.