114InputsSource RenameChange the display name of the selected input source.This is convenient when the input source name of your device and the input source name of this unit aredifferent. You can change the name to suit your needs. When the renaming is completed, the name isdisplayed on this unit’s display and on the menu screen.Setting detailsCBL/SAT / DVD / Blu-ray / GAME / AUX / MEDIA PLAYER / CD / TV AUDIO : Change the display nameof the selected input source.• Up to 12 characters can be input.• For character input, see page 99.Set Defaults : The “Source Rename” settings are returned to the defaultsettings.• Reset : Reset to the defaults.• Cancel : Do not reset to the defaults.If you select “Set Defaults” and press ENTER, the message “Reset allsource names to the factory defaults?” is displayed. Select “Reset” or“Cancel”, and then press ENTER.Hide Sources Default settings are underlined.Remove from the display input sources that are not used.Setting detailsCBL/SAT / DVD / Blu-ray / GAME / AUX / MEDIA PLAYER / iPod/USB / CD / TUNER / Favorites /Internet Radio / Media Server / Pandora / SiriusXM / Spotify / Flickr / TV AUDIO : Select input sourcethat is not used.• Show : Use this source.• Hide : Do not use this source.NOTE• Input sources being used in the various zones cannot be deleted.• Input sources set to “Hide” cannot be selected using the input source select button.Source Level Default settings are underlined.• This function corrects the playback level of the selected input source’s audio input.• Make this setting if there are differences in the input volume levels between the different sources.Setting details–12dB – +12dB (0dB)Input Select Default settings are underlined.Set the audio input mode and decode mode of each input source.The input modes available for selection may vary depending on the input source.Setting items Setting detailsInput ModeSet the audio input modesfor the different inputsources.It is normally recommendedto set the audio input modeto “Auto”.Auto : Automatically detect input signal and perform playback.HDMI : Play only signals from HDMI input.Digital : Play only signals from digital input.Analog : Play only signals from analog input.• “Digital” can be set for input sources for which “DIGITAL” is assignedat “Input Assign” (vpage 113).• When digital signals are properly input, the indicator lights onthe display. If the indicator does not light, check “Input Assign”(vpage 113) and the connections.• If “HDMI Control” is set to “On” and a TV compatible with the ARC isconnected via the HDMI MONITOR connectors, the input mode whoseinput source is “TV AUDIO” is fixed to ARC.Decode ModeSet the audio decode modefor input source.CBL/SAT DVDBlu-ray GAMEAUX MEDIA PLAYERCD TV AUDIOAuto : Detect type of digital input signal and decode and play automatically.PCM : Decode and play only PCM input signals.DTS : Decode and play only DTS input signals.• This item can be set for input sources for which “DIGITAL” is assignedat “Input Assign” (vpage 113).• Normally set this mode to “Auto”. Set “PCM” and “DTS” wheninputting the corresponding input signal.