Listening to FM/AM broadcasts1 Connect the antenna. (“Connecting an FM/AMantenna” (v p. 84))2 Press TUNER to switch the input source to “Tuner”.G TV screen H .STEREO AUTOOPTIONOPTIONTunerFM 87.50MHzNow PlayingTune Preset OptionCH 1G Display of this unit H .01 FM 87.50MHz3 Press OPTION.The option menu screen is displayed.4 Use ui to select “FM/AM”, then press ENTER.This displays the reception band input screen.5 Use o p to select “FM” or “AM”, then press ENTER.FM: When listening to an FM broadcast.AM: When listening to an AM broadcast.6 Press TUNE + or TUNE - to select the station you wantlisten to.Scanning is performed until it finds an available radio station. Whenit finds a radio station, it stops the scan automatically and tunes in.0 The modes for receiving FM broadcasts consists of “Auto” mode that automaticallysearches available broadcast stations and “Manual” mode that lets you tune inusing buttons to change the frequency. The default setting is “Auto”. You can alsouse “Direct Tune” to tune in by entering the frequency directly.In “Auto” mode, you cannot tune in to radio stations if the reception is not good.If this is the case, then use the “Manual” mode or “Direct Tune” mode to tune in.Operation buttons FunctionTUNE +, – Selects the radio station (up/down)CH/PAGE d f Selects preset radio stationsu i Selects the radio station (up/down)o p Selects preset radio stations0 – 9 Preset channel selection /Direct frequency tuningContents Connections Playback Settings Tips Appendix104Front panel Display Rear panel Remote Index
