o Power SavingIf “TV Speaker” is set as the audio output setting of your TV, this unit isautomatically set to standby mode to reduce power consumption.This function is activated in the following cases.0 When “TV Audio” is selected as the input source of this unit0 When playing content from a device connected by HDMIOn: Use Power Saving function.Off(Default): Do not use Power Saving function.0 “Power Saving” can be set when “HDMI Control” is set to “On”. (v p. 194)o Smart MenuThis function can be used to configure the settings of this unit, selectan input source and set Tuner and Internet Radio stations using the TVremote control.On: Use Smart Menu function.Off: Do not use Smart Menu function.0 “Smart Menu” can be set when “HDMI Control” is set to “On”. (v p. 194)NOTE0 If the “Smart Menu” settings have been changed, always reset the power toconnected devices after the change.0 The Smart Menu function may not work properly depending on thespecifications of your TV. In this case, set “Smart Menu” to “Off”.Contents Connections Playback Settings Tips Appendix196Front panel Display Rear panel Remote Index
