SpeakersThe acoustic characteristics of the connected speakers and listening room are measured and the optimum settings are made automatically. This is called“Audyssey® Setup”.You do not have to perform Audyssey® Setup when you have already performed “Speaker Calibration” in “Setup Assistant”.To set up the speakers manually, use “Manual Setup” on the menu. (v p. 219)Audyssey® SetupTo perform measurement, place the Sound calibration microphone inmultiple locations all around the listening area. For best results, werecommend you measure in six or more positions, as shown in theillustration (up to eight positions).When measuring the second and subsequent positions, install the Soundcalibration microphone within 60 cm of the first measurement position(main listening position).0 If you perform the Audyssey® Setup, the Audyssey MultEQ® XT32, AudysseyDynamic EQ®, Audyssey Dynamic Volume® and Audyssey LFC™ functions areenabled. (v p. 185) .FL SW C FRSRSLSurround speaker (R)Surround speaker (L)SubwooferCenter speakerFront speaker (R)Front speaker (L)( :Measuring positions)FLFRCSWSLSRListening positionContents Connections Playback Settings Tips Appendix208Front panel Display Rear panel Remote Index
