Denon AVR-X4500H Owner's Manual

Also see for AVR-X4500H: Service manual Owner's manual

GRelation between the “4K Signal Format” setting and supportedresolutionsHSupportResolutionColorSpacePixelDepth4K Signal FormatEnhanced Standard(Default)4K 24p, 4K30p, 4K 25pRGB /YCbCr 4:4:48 bit P P10,12 bit P –YCbCr 4:2:2 12 bit P P4K 60p, 4K 50p YCbCr 4:2:0 8 bit P P10,12 bit P –RGB /YCbCr 4:4:48 bit P –YCbCr 4:2:2 12 bit P –0 When setting this to “Enhanced”, we recommend using a “Premium HighSpeed HDMI Cable” or “Premium High Speed HDMI Cable with Ethernet” thathas an “HDMI Premium Certified Cable” label attached to the productpackage.0 When this setting is “Enhanced”, configure the television or playback devicesettings to match this setting.0 When this setting is “Enhanced”, video may not be output correctly dependingon the connected playback device or HDMI cable. In this case, change thissetting to “Standard”.0 “Custom” is displayed for the setting item if our service engineers or custominstallers has configured the HDMI signal format for this unit.0 “4K Signal Format” can also be set by the following procedure. However, themenu screen is not displayed. Watch the display while configuring the setting.1. Press and hold the main unit’s STATUS and ZONE3 SOURCE at the sametime for at least 3 seconds.“zVideo Format ” appears on the display.2. Use u or i on the main unit.“4K Format:” appears on the display.3. Use the main unit's o or p and select the 4K Signal Format.4. Press the main unit’s ENTER to complete the setting.Contents Connections Playback Settings Tips Appendix204Front panel Display Rear panel Remote Index