38AppendixTipsSettingsConnectionsContentsFront panel Display Rear panel IndexRemotePlaybackListening to FM/AM broadcasts1 Press TUNER to switch the input source to “TUNER”.GTV ScreenHTUNERA1TuningPresetBandMemoryModeFM 87.50MHzAUTONow PlayingTUNE BANDCHANNELMODEMEMORYGDisplay of this unitHA1 FM 87.50MHz2 Press BAND to select “FM” or “AM”.FM : When listening to an FM broadcast.AM : When listening to an AM broadcast.3 Press MODE to select tuning mode.AUTO : Automatically search for and tune to a receivable radiostation.MANUAL : Manually change the frequency one step at a time eachtime the button is pressed.4 Use TUNE + or TUNE – to select the station you wantto hear.Scanning is performed until it finds an available radio station. Whenit finds a radio station, it stops the scan automatically and tunes in.%• The modes for receiving FM broadcasts consists of “AUTO” mode thatautomatically searches available broadcast stations and “MANUAL” mode that letsyou tune in using buttons to change the frequency.In “AUTO” mode, you cannot tune in to radio stations if the reception is not good.If this is the case, then use the “MANUAL” mode to tune in.Operation buttons FunctionMEMORY Preset memory registrationBAND Reception band switchingSHIFT Preset channel block selectionMODE Tuning mode switchingCHANNEL +, – Preset channel selectionTUNE +, – Tuning (up/down)SEARCH RDS search screen display