Denon AVR-X500 Owner's Manual

Also see for AVR-X500: Service manual Owner's manual Getting started

Contents

23Stereo playbackThis is the mode for playing in stereo. The tone can be adjusted.• Sound is output from the front left and right speakers and subwoofer.• If multi-channel signals are input, they are mixed down to 2-channelaudio and are played.1 Play the selected device(vpage 16, 17).2 Press SURROUND 0 orSURROUND 1 to select“STEREO”.Stereo playback begins.Direct playbackSound recorded in source is played as is.• In this mode, the following items cannot be adjusted.• Tone (vpage 43) • RESTORER (vpage 44)1 Play the selected device(vpage 16, 17).2 Press SURROUND 0 orSURROUND 1 to select“DIRECT”.Direct playback begins.Multi-channel stereo playbackThis mode is for enjoying stereo sound from all speakers.1 Play the selected device(vpage 16, 17).2 Press SURROUND 0 orSURROUND 1 to select “MULTICH STEREO”.Multi-channel stereo playback begins.NOTEWhen the input signal is Dolby TrueHD, Dolby Digital Plus, DTS-HD orDTS Express, you cannot select multi-channel stereo mode.Virtual playbackThis mode is for enjoying surround effects using only the frontspeakers or headphones.1 Play the selected device(vpage 16, 17).2 Press SURROUND 0 orSURROUND 1 to select“VIRTUAL”.Virtual playback begins.NOTEWhen the input signal is Dolby TrueHD, Dolby Digital Plus, DTS-HD orDTS Express, you cannot select virtual mode.