Denon AVR-X500 Owner's Manual

Also see for AVR-X500: Service manual Owner's manual Getting started

Contents

29n Adjusting the volume of the speakers(vpage 29)n Sleep timer function (vpage 30)n Quick select function (vpage 30)n Various memory functions (vpage 30)Playback (Basic operation) (vpage 15)Selecting a listening mode (Surround mode)(vpage 21)Playback (Advanced operation)Adjusting the volume of the speakersYou can adjust the channel level either according to the playbacksources or to suit your taste, as described below.Adjusting the volume of the differentspeakers1 Press CH LEVEL.LevelsFront RearFront LCenterFront RSubwooferSurround RSurround LFader0.0dB0.0dB0.0dB0.0dB0.0dB0.0dB2 Use ui to select the speaker.The speaker that can be set switches each time one of thebuttons is pressed.3 Use o p to adjust the volume.• In the case of a subwoofer, pressing o when it is at “–12 dB” willchange the setting to “Off”.• If you do not press any button for approximately 5 seconds, themenu screen light turns off.• When a headphone jack is inserted, the headphone channel levelcan be adjusted.Adjusting the volume of groups of speakers(Fader function)This function lets you adjust (fade) the sound all at once from the front(front speaker / center speaker) or rear (surround speaker).1 Press CH LEVEL.LevelsFront RearFront LCenterFront RSubwooferSurround RSurround LFader0.0dB0.0dB0.0dB0.0dB0.0dB0.0dB2 Press i to select “Fader”, then select the item to beadjusting using o p.LevelsFront RearFront LCenterFront RSubwooferSurround RSurround LFader0.0dB0.0dB0.0dB0.0dB0.0dB0.0dB3 Use o p to adjust the volume of the speakers.(o : front, p: rear)• If you do not press any button for approximately 5 seconds, themenu screen light turns off.• The fader function does not affect the subwoofer.• The fader can be adjusted until the volume of the speaker is adjustedto the lowest value of –12 dB.