Denon AVR-X500 Owner's Manual

Also see for AVR-X500: Service manual Owner's manual Getting started

Contents

35Preset Skip Default settings are underlined.Set the preset memory block (from A to G) you do not want to display.Setting items Setting detailsBlock A – Block GSelect a block to be skippedfrom among preset blocks(from A to G).TUNEROn : Display the selected preset memory block.SKIP : Do not display the selected preset memory block.Source Level Default settings are underlined.This function corrects the playback level of the selected input source’s audio input.Make this setting if there are differences in the input volume levels between the different sources.Setting items Setting detailsSource Level –12dB – +12dB (0dB)Input Select Default settings are underlined.Set the audio input mode and decode mode of each input source.The input modes available for selection may vary depending on the input source.Setting items Setting detailsInput ModeSet the audio input modesfor the different inputsources.It is normally recommendedto set the audio input modeto “Auto”.Auto : Automatically detect input signal and perform playback.HDMI : Play only signals from HDMI input.Digital : Play only signals from digital input (OPTICAL 1 / OPTICAL 2).Analog : Play only signals from analog input.• At time of purchase, the settings of the different input sources are asshown below.Input source CBL/SAT DVD Blu-ray GAMEDefault setting Auto Analog HDMI HDMIInput source AUX TV AUDIO PORTABLEDefault setting HDMI Digital AnalogInputsSetting items Setting detailsInput Mode(Continued) • “Digital” can be set for the input source assigned to “OPTICAL 1” or“OPTICAL 2” under “Input Assign” in the menu.• If the input source is set to “Blu-ray”, “GAME”, “AUX” or “TV AUDIO”,it cannot be set to “Analog”.• If an input source is “TUNER” or “PORTABLE” the setting is fixed to“Analog”.• When digital signals are properly input, the indicator lights onthe display. If the indicator does not light, check the digital inputconnector assignment and the connections.Decode ModeSet the audio decode modefor input source.CBL/SAT DVDBlu-ray GAMEAUX TV AUDIOPORTABLEAuto : Detect type of digital input signal and decode and play automatically.PCM : Decode and play only PCM input signals.DTS : Decode and play only DTS input signals.• This item can be set for input sources for which “OPTICAL 1” or“OPTICAL 2” is assigned at “Input Assign” (vpage 34).• This item can be set for HDMI input sources (CBL/SAT, Blu-ray, GAMEor AUX).• Normally set this mode to “Auto”. Set “PCM” and “DTS” wheninputting the corresponding input signal.Video Source Default settings are underlined.Video of another input source is played back combined with the playing audio.Setting items Setting detailsVideo Select Default : Play the picture and sound of the input source.CBL/SAT / DVD : Select video input source to view. The video of theselected input source is played along with the audio currently beingplayed. This can be set for individual input sources.NOTEIt is not possible to select HDMI input signals.