Trigger Out 1 / Trigger Out 2Select the conditions for activating trigger out.For details about how to connect the TRIGGER OUT jacks, see“TRIGGER OUT jacks” (v p. 84).n When setting for zone (MAIN ZONE / ZONE2 /ZONE3)Trigger out is activated through linkage to the power of the zone set to“On”.n When setting for input sourceActivates trigger out when the input source set to “On” is selected.n When setting for HDMI monitorActivates trigger out when the HDMI monitor set to “On” is selected.On: Activate trigger on this mode.– – –: Do not activate trigger on this mode.Front DisplayMakes settings related to the display on this unit.o DimmerAdjust the display brightness of this unit.Bright(Default): Normal display brightness.Dim: Reduced display brightness.Dark: Very low display brightness.Off: Turns the display off.You can also adjust the display by pressing DIMMER on the main unit.o Channel IndicatorsSets whether to use the input signal display or output signal display forthe channel indication on the display.Input: Uses the input signal display for the channelindication on the display.Output(Default):Uses the output signal display for thechannel indication on the display.Contents Connections Playback Settings Tips Appendix283Front panel Display Rear panel Remote Index
