ENGLISHGetting StartedConnectionsSetting the TimerOther FunctionsTroubleshootingSpecifications<1/3><5>ON/STANDBYSOURCEMENU/SETSDB/TONE8,9ON/STANDBY[MUTE][o p][ENTER/MEMO]8,9[VOLUMEdf]MENU/SETSDB/TONE[CLOCK]SOURCE[DIMMER][CD1/3]Button located on both the main unit and the remote controlunitBUTTONButton only on the main unitButton only on the remote control unit[BUTTON]Symbols used to indicate buttons in this manualGExampleHSetting the current time to 10:15 am1PressON/STANDBYto turn the power on.2Press[CLOCK].The current time is displayed.3PressMENU/SETfor over 1 second to set the manualtime setting mode.The “hours” display flashes.4Use8,9or[op]to set the “hours”.5PressMENU/SETor[ENTER/MEMO].The “minutes” display flashes.6Use8,9or[op]to set the “minutes”.7PressMENU/SETor[ENTER/MEMO].The current time is set, and the normal display reappears.TIME Adj AM12:00TIME Adj AM12:00TIME Adj AM10:00TIME Adj AM10:00TIME Adj AM10:00TIME Adj AM10:00TIME Adj AM10:15TIME Adj AM10:15nChecking the current time when the power is onPress[CLOCK].When pressed again or if a different operation is performed, thenormal display reappears.nChecking the current time when the power is setto standbyPressMENU/SETor[CLOCK].Press again to turn off display.•Displaying the time when the power is set to standby consumeselectricity. To reduce electric consumption, turn the time display off.•When the function is set to iPod, the current time cannot be set.SetupPlaybackSetupSetting the Current Time(12-Hour Display)
