ENGLISHGetting StartedConnectionsSetupPlaybackOther FunctionsTroubleshootingSpecifications2>8,9ON/STANDBYVOLUMEMENU/SET[SLEEP]ON/STANDBYMENU/SET[2][ENTER/MEMO]VOLUME8,9[o p]Button located on both the main unit and the remote controlunitBUTTONButton only on the main unitButton only on the remote control unit[BUTTON]Symbols used to indicate buttons in this manualTimer PlaybackThe everyday timer, once timer and sleep timer can be set.The order of priority when the times set for the differenttimers overlap is as follows:1.Sleep timer2.Once timer3.Everyday timerTimer order of priorityTimer order of prioritySetting the Timer•Everyday timer playbackPlayback starts (the power turns on) and stops (the powerturns off) at the set times each day.•Once timer playbackPlayback starts (the power turns on) and stops (the powerturns off) once only at the set times.1PressMENU/SET.The “TIMER” is displayed.bOperate within 5 seconds.2Use8,9or[op]to select the timer playmode.ONCEEVERYDAYz“1” : Once timer, “E” : Everyday timer3PressMENU/SETor[ENTER/MEMO].The timer play mode is set.<EVERYDAY><EVERYDAY>4Use8,9or[op]to select the function to beplayed.AUX1(AUX1/Dock)USBTUNERCDAUX25PressMENU/SETor[ENTER/MEMO].The function to be played is set.bIf the function is set to anything other than the tuner, the settingdisplay shown in step 7 is displayed.GOnly when the “TUNER” function is selectedH6-qUse8,9or[op]to select the presetnumber.-wPressMENU/SETor[ENTER/MEMO].The broadcast station for the selected preset number isset.7Use8,9or[op]to set the “hours” for thetimer start time.8PressMENU/SETor[ENTER/MEMO].The “hours” for the timer start time are set.9Use8,9or[op]to set the “minutes” for thetimer start time.10PressMENU/SETor[ENTER/MEMO].The “minutes” for the timer start time are set.11Use8,9or[op]to set the “hours” for thetimer stop time.12PressMENU/SETor[ENTER/MEMO].The “hours” for the timer stop time are set.E<C D>E<C D>EEEONAM12:00EONAM12:00EONAM10:00EONAM10:00EOFF AM12:00EOFF AM12:00Setting the TimerSetting the Timer
