Denon D RCD-M37 Owner's Manual
Also see for D RCD-M37: Brochure & specsOwner's manualOwner's manualService manualUser manual
                                       | |
Contents
| 
ENGLISHGetting Started Connections Setup Playback Setting the Timer Troubleshooting Specifications<5> 1/3< 8/–, +/9 >ON/STANDBYMENU/SETON/STANDBY[USB 1/3][iPod 1/3][CD 1/3][TUNER]MENU/SET[CLOCK][o p]ON : The response is optimized for the speakers (SC-M37,supplied).OFF : The response is flat.Button located on both the main unit and the remote controlunit BUTTONButton only on the main unit Button only on the remote control unit [BUTTON]Symbols used to indicate buttons in this manualConvenient Functions[Selectable items]Last Function MemoryThis stores the settings as they were directly before thestandby mode was set.When the power is turned back on, the settings arerestored to as they were directly before the standby modewas set.Resetting the MicroprocessorPerform this procedure if the display is abnormal or ifoperations cannot be performed.When the microprocessor is reset, all the settings arereset to their default values.Auto Power OnWhen the power is in standby, the power turns on whenany of the buttons below other than ON/STANDBY isoperated, and the respective operation is performed.• <5>∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ The disc tray opens.• 1/3 for the different functions∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ Playback of that source starts.• [TUNER]∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ Playback of the tuner starts.NOTEThe Auto Power On function cannot be used with iPods.Auto Function Selector FunctionWhen one of the buttons below is pressed, the functionswitches to the respective function and playback of thatsource starts.• [CD 1/3] ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ The function switches to “CD” and theCD starts playing.• [USB 1/3]∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ The function switches to “USB” and theUSB starts playing.• [iPod 1/3] ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ The function switches to “AUX1/Dock”and the iPod starts playing.• [TUNER] ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ The functions switches to “TUNER” andthe band last set is tuned in.1 Unplug the power cord.2 Plug the power cord into a power outlet while pressing<8/–> and simultaneously.3 Press [CLOCK].The “AM12:00” display flashes.If “AM12:00” is not flashed in step 3, start over from step 1.Using an Optimizing FilterAn optimizing filter suited for the properties of the speakers(SC-M37) can be used.1 Press MENU/SET to select “SP OPTIMISE”.2 Use <8/–, +/9> or [o p] to select “ON” or“OFF”.3 Press MENU/SET to set.Other FunctionsWhen the function is set to iPod, the set cannot be switched betweenon and off.Other Functions |
Related manuals for Denon D RCD-M37
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine