Denon DBP-A100 Owner's Manual

Also see for DBP-A100: Owner's manual Owner's manual

Contents

TroubleshootingInformationHDMI Control FunctionPlaybackSetupGetting Started SpecificationsENGLISH161. Home Theater Playback – Playing Back Using Multi-channel System –Audio Signal from the Digital Audio Output (Optical/Coaxial) TerminalThe DBP-A100 can convert and output digital audio signal format recorded on various media.Convert the digital audio signal in accordance with the specifications of the device that is to input digitalaudio output signals from the DBP-A100.Media/Files Audio formatSetting “Audio Setup” – “Digital Out” (vpage 27) onthe GUI menuBitstream PCM/PCM Down SamplingBDDolby DigitalDolby Digitalz12-ch Downmix LPCMDolby Digital PlusDolby TrueHDDTS DTSz1DTS-HDLPCM 2-ch Downmix LPCMz1AVCHD Dolby Digital Dolby DigitalLPCM 2-ch Downmix LPCMDVD-VideoDolby Digital Dolby DigitalDTS DTSLPCM, MPEG 2-ch Downmix LPCMDVD-Audio LPCM, PPCMSuper Audio CDMulti area Audio is not outputStereo areaCD layer 2-ch LPCMDivX® Dolby Digital Dolby Digital 2-ch Downmix LPCMMP3, MP22-ch LPCMCDMP3, WMA, AAC, LPCMDTS-CD DTS 2-ch Downmix LPCM(DTSz2)z1 : Bitstream signals are output according to the BD re-encode setting when “BD Audio Mode” is setto “Mix Audio Output” (vpage 32).z2 : When “HDMI Setup” – ”Audio Setup” is set to “Auto” on the GUI menu and bitstream is output fromthe HDMI , the DTS bitstream is output from the digital audio output (optical/coaxial) as well.For content with copyright protection, audio signal is down-sampled to 48kHz 16bit and output.Connecting to a Device with an Analog Multi-channel AudioInput TerminalOutputs multi-channel audio decoded by the DBP-A100.If your audio system has an analog multi-channel audio input terminal, connect using audio cable (soldseparately).FRONTSUBWOOFERRLRLRLSURROUNDSURROUND BACKCENTERAUDIOR RL LR RL LR RL LAV AmpIn the case of a 5.1-channelconnection, you do not need toconnect the SBR/SBL terminals.In this case, on the GUI menu,select “Audio Setup” – “7.1chAudio Out” – “Multi Channel” –“Speaker Configuration” – “Surr.Back”, and set “Size” to “None”(vpage 25).Connections