Denon DCD-1500II Service Manual

10FG-610 LASER PICK-UP MECHANISMHow to move the Looder Frame manuallyManually push the lock arm (a) to the rightward andpull the Loader frontward, then the Loader can beopen/close manually.Whole body of the Laser Pick-up MechanismFG-610Removing 4 screw makes possible to detach wholebody of the Laser Pick-up Mechanism from the Chassis.Loader FrameRemove whole body of the Laser Pick-up MechanismFG-610, pull the Loader Frame frontward, lift theLoader Rail G4) upward and pull it out backward, thenthe Loader Frame can be taken out.Housing AssemblyRemove 4 screw Or = (a)3, and detach the Assemblycomposed of Laser Pick-up Magnet, Yoke, Turntable,and Spindle Motor.By removing of screw @). the parts for mechanismfloating can be taken down as illustration shows.When reassembling, remind that the Washer andH-damper are commonly used, but the Coil Spring andCollar are provided two types for maintaining equilb-rium.4630515 000COIL SPRING (D)463 0515 000433 0484 004COLLAR (A)433 0485 003COLLAR (B)COIL SPRING (D)433 0485 003COLLAR (B).463 0514 001COIL SPRING (C)Coil spring (D) (used 3 each) is marked in red.Coil spring (C) (used 3 each) is not marked.Collar (B) (used 2 each) is made of brass (yellow).Collar (A) (used 2 each) is made of brass plated withnickel (white)Laser Pick-up KSS-151A(1) Detach the Housing Assembly illustration.(2) Remove 2 screws @), unsolder 2 portions (8), anddetach the Speed Detection Coil.(3) Next, remove 2 screws ) unsolder 2 portions (),and detach the Drive Coil. And pull out the Shaft atportion (E ), then the Lase Pick-up can be taken out.WasherCoil Spring (C), (D)H-damperCollar (A), (B)om,