ENGLISHOptimum installation layoutThe DHT-FS3 can reproduce a realistic 5.1-channel surround sound for enhanced sense of presence usingjust the front speaker unit and the subwoofer.Ideal layout examples flat against a wall> in a corner>Installation tipsInstalling as shown below provides a better surround effect.• Listen from a distance of at least 1 meter from the front speaker unit.• Keep the front speaker unit away from the left and right walls.• When mounting in a TV rack, use with the door opens.Connecting the front speaker unit and subwooferUse the exclusive connection cable to connect.b To disconnect theplug, press down onthe lock lever andpull.Lock leverEChanging the speaker connection cableThe included connection cable can be replaced, for example if you want a longer cable.q Pressing the release button on the opposite sidefrom lock lever, pull the cable out of the plug.w Peel off the sheathing from the tip of the newcable and twist tightly so that the tip is notfrayed.e Pressing the release button, insert the cores intothe plug, matching the cable’s + and – polaritieswith the + and – sides on the plug.r Release the release button and gently pull onthe cable to check that it is secure.Release buttonRelease buttonLock lever0.03 ft /10 mmNOTE:• Do not place any heavy objects (TV, etc.) on top of the DHT-FS3.• The size of the room, the distance between the DHT-FS3 and the listening position, etc., can be set usingthe “ROOM” option in the “Detailed settings” (vpage 11).NOTE:• Be sure to insert the connection cable’s plugfully to the hilt. Incomplete connections willcause noise or operating problems.InstallationGetting Started Connections Settings Operation Other functions Operating theremote control unit Troubleshooting SpecificationsENGLISHNOTE:• Speaker connection cables of up to 1.2 mm in thickness can be connected to the DHT-FS3’s speakerterminal.
