Denon DHT-FS3 Owner's Manual

Also see for DHT-FS3: Specifications Owner's manual

Contents

ENGLISHENGLISHDetailed Settings1 At [SETUP], select the first menu.2 Press [ENTER].• The second menu is displayed.3 Use [ui] to select, then press[ENTER].b Set the third menu in the same way.• Select the different items on the menus whilethey are displayed (within 5 seconds).• The settings remain in effect even after the powerhas been turned off.• Settings indicated by are the factorydefaults.SettingsGetting Started Installation Connections Operation Other functions Operating theremote control unit Troubleshooting Specifications• Set this to “ON” when listening with the volumelow (for example at night) to make the dialogsmore distinct.• Valid for “DOLBY” and “DTS” digital audio inputsources.• Turns on when an audio input is detected.Turns off if no signal is input for over 10 minutes.• Turn this on when connecting an AV amplifier andusing for the center speaker and subwoofer. TheDHT-FS3’s surround-related functions are turned off.• The surround level is higher for the MOVIE modethan for the MUSIC mode.Use to select,to set.Adjustment range: 0 dB or +6 dBTONETone adjustment (bass/treble)FADERFront/rear volume balance adjustmentNIGHTNight mode settingROOMSettings for the installation position andwall hardness(how the sound reflects)GAINAdjustment of the input level for thedifferent analog input functionsDELAYAdjustment of the audio delay timePWR ONAuto power mode settingCENTERSpeaker mode settingDUALBilingual audio settingSetSetBASS Bass levelTREBLE Treble levelOFF Normal balanceMOVIE For movie sourcesMUSIC For music sourcesOFF Normal playbackON Night mode onDIST Distance to listening positionOFFSET Offset from centerREFL How sound reflects off wallsTV b Sound connected to TV inputterminalsAUX b Sound connected to AUXinput terminalsAdjustment range:0 ms ~ 170 msON Auto power onOFF Low standby power modeMAIN Main audio playedSUB Sub audio playedM/S Both main and sub audio playedOFF Normal playbackON DHT-FS3’s surround function offSetSetSetSetSetSetDistance adjustment range:3.9 ft / 1.2 m ~ 8.9 ft / 2.7 m ~ 17.7 ft / 5.4 mOffset distance adjustment range:2.9 ft / 0.9 m to 9.8 ft / 3.0 m for both L and R. Thisdepends on the setting of the distance to the listeningposition (“DIST”).Reflection setting items:SOFT …When there are curtains, etc.MEDIUM …For wood or other soft wallsHARD …For glass or hard walls, etc.Adjustment range:–12 dB ~ 0 dB ~ +12 dBSetSetSetSetUse to select,to set.Use to select,to set.1st menu 2nd menu 3rd menu