Denon DHT-M330DV Operating Instructions Manual

Also see for DHT-M330DV: Operating instructions

Contents

33ENGLISH(1) Before playing with the surround function• Adjustments using the test tones can only be performed in the“Auto” mode and are only valid for the AUTO DECODE Surroundmodes. The adjusted levels are automatically stored in the memory.10 SURROUND PLAYBACK• Even after adjusting using the test tones, the various channels canbe adjusted using the procedure described below to suit theprogram source and your preferences.1, 423342, 41, 31 Press the TEST TONE button.Remote control unit2 Test tones are output from the different speakers.Either turn the MASTER VOLUME dial on the main unit oruse the VOLUME buttons on the remote control unit toadjust the volume.Main unit+-Remote control unit3 Use the channel volume adjust buttons to adjust so that thevolume of the test tones is the same for all the speakers.• The ( and ) cursor buttons on the remote control unitduring the adjustments using the test tones.Remote control unit4 After adjusting using the test tones, adjust the channel levelseither according to the playback sources or to suit your tastes,as described below.Remote control unit1 Press the CH.SELECT button on the remote control unit.• The following is displayed:Remote control unit2 Use the select button while the above is displayed toselect “LEVEL”.• The level display shown below appears.Remote control unit3 Select the speaker whose level you want to adjust.• The channel switches as shown below each time the buttonis pressed.Remote control unit4 Adjust the volume level of the selected speaker while thechannel level is displayed.L LE V E < / LD> E YAF OL V L < B0 d >Remote control unitOnce the channel level setting is completed, select “END” at step3. The display returns to normal after several seconds.ENDSUBWOOFER SURROUND RSURROUND LFRONT L CENTER FRONT R