Denon DHT-M330DV Operating Instructions Manual

Also see for DHT-M330DV: Operating instructions

Contents

54ENGLISH2 Making system connections between the AVR-M330 and the DVD player (DVD-M330) makes operation even easier. (For instructions onconnections, refer to “Connecting the audio components” on pages 14.)2 System functions will not work properly if the input/output function settings are not right for the connected components. Be sure to set theinput/output functions for the components being used. (See page 28.) The setting contents are maintained until they are next changed evenwhen the power is switched off.(1) Auto power on function• When the play button on the DVD unit ( 1 ) or the DVD play button on the remote control unit ( 1 ) is pressed while the power is in thestandby mode, the DVD-M330 and AVR-M330’s power turns on automatically, and if a disc is loaded in the DVD-M330 the disc is played.11 When the DVD-M330 and AVR-M330 are in the standbymode, the power can be turned on simply by pressing theplay button on the DVD unit or the DVD play button on theremote control unit. If a disc is loaded, playback starts.• To listen to a radio program, simply pressone of the tuner preset buttons (“+” or “–”)on the remote control unit. The power turnson and a station is tuned in.+-CHRemote control unit(2) Auto function selection• At the touch of a button, the function switches automatically to“DVD” and disc playback begins.11• To listen to a radio program, simply press oneof the tuner preset buttons (“+” or “–”) onthe remote control unit.• Auto function selection does not work forcomponents connected using the TV/AUX1orAUX2 input terminals.+-CHRemote control unitDVD-M330 Remote control unitDVD11Press the play button on the DVD-M330 or the DVD playbutton on the remote control unit.• The AVR-M330’sfunction switches to“DVD” and if a discis loaded playback ofthe disc starts.DVD-M330 Remote control unitDVD115 SYSTEM FUNCTIONS1AVR-M330DVD-M330DVD-M330