Denon DN-2600F Operating Instructions Manual

Also see for DN-2600F: Operating instructions

Contents

ENGLISH25(2) Presetting procedureH The presetting procedure can be performed in the cue or pause mode, when no disc is loaded or when the disc holder is open.12Set the preset operation selection mode.Press the PRESET button.Select the preset item.Turn the data master knob (8—9).] The first preset item displayed is the last preset itemdisplayed the last time the presettings were mode.AutoCue ONBK Time LEOM OFFPreset Int?PUSH ENTERTurn the knob clock-wise to move in thedirection of thearrows, counterclock-wise to move in theopposite direction.34Change the setting.Press the data master knob (8—9).• When the data master knob (8—9) is turned, theplayer returns to the same status as in step 2.Cancel the preset mode.Press the PRESET button.NOTE:• If the message shown below appears, there is a problemwith the preset memory. Contact a serviceperson.Eeprom Error13 PRESET FUNCTIONS AND OPERATIONS(1) Preset functionsH Use these functions to preset the DN-2600F’s operation modes. These presettings are stored in a permanent memory, so they are not clearedeven when the power is turned off.H The functions shown on the table on page 26 can be preset. Set these judiciously according to your usage purpose for more efficientoperation.