Denon DN-S3700 Owner's Manual

Also see for DN-S3700: Brochure Service manual Addendum to owner's manual

Denon DN-S3700 Owner's Manual Manual pdf 23 page image

Getting Started Connections Playback SpecificationsMemo Function UtilitySetting for the AUTO LOOPu Press the AUTO LOOP SET button toset this mode.Storing auto loop pointsi Press one of buttons 1, 2 and 3 when the button islit a dark red.The auto loop point is stored and the buttonis lit a bright red.b Auto loop points cannot be stored at buttons that are lit bright redor bright green.Auto loop playbacko Press one of buttons 1, 2 and 3 when the button islit a bright red.The auto loop playback is started.Adjusting the auto loop lengthQ0 During auto loop playback, turn theEFFECTS knob.The auto loop length switches as follows:1/8 1/4 1/2 1 2 4 8 1632 64 beatsTrimming the Auto Loop to perfectionQ1 During auto loop playback, press theLOOP TRIM +/– buttons to trim the loop.Each press to the + button makes the loop longer by 1-framesteps.Each press to the – button makes the loop shorter by 1-framesteps.Canceling auto loop playbackQ2 During auto loop playback, press the EXITbutton.Auto loop playback is canceled and normal playback resumes.Auto loop playbackThis function automatically sets loops in perfect beats. Upto three auto loop points or hot start points can be storedat buttons 1, 2, and 3.b BPM needs to be registered for Auto loop playback.Storing hot start pointsQ4 Press one of buttons 1, 2 and 3 when the button islit a light green.The hot start point is stored and the buttonis lit a bright green.b Hot start points cannot be stored at buttons that are lit bright redor bright green.Hot start playbackQ5 Press one of buttons 1, 2 and 3 when the button islit a dark green.The hot start point is stored.Clearing hot start pointsQ6 Press one of buttons CLR1, CLR2 or CLR3.The hot start point for the correspondingnumber is cleared.Hot start playbackThis is the hot start playback function. Up to three autoloop points or hot start points can be stored at buttons 1,2, and 3. Q7 During seamless looping, press the A/B TRIMbutton to turn on the adjustment mode.b During playback in modes other than looping, thenext file mode is set when the A/B TRIM button ispressed. Q8 Press the A button to select the A point.b Adjustment is possible for the currently playing loop.b Press the B button to select the B point.Turn the Vinyl disc to adjust the A or B point.The position can be adjusted in units offrames.A Point:±30 frames from the A point. If there is a Bpoint, however, adjustment is only possible upto 5 frames before the B point.B Point:Adjustment is possible from 5 frames after the A point throughthe end of the track.Press the A button to set the new A or B point.When set, the A/B TRIM mode is exitedautomatically.A/B TrimThe positions of the seamless loop A and B points can befine-adjusted with the Vinyl disc.The points can be fine-adjusted while listening to the loopplay sound.Basic OperationsClearing auto loop pointsQ3 Press one of buttons CLR1, CLR2 or CLR3.The auto loop point for the corresponding number is cleared.