Connections Playback SpecificationsBasic Operations Memo Function UtilityInstalling the Platter, the Vinyl Disc and the Slip Mat(1) Installing the Platter, the Vinyl Disc and the Slip MatCAUTIONS• Do not touch the motor unit.• Do not turn on the power without the Platter and Vinyl disc beingmounted.Fig.1 ScrewVinyl DiscSlip MatPlatter(2) InstallationPlease set up DN-S3700 horizontally.Fig.2ScrewVinyl DiscSlip MatGetting Started 1. Install the Platter on the taper boss of the motor.2. Install the Slip Mat on the Platter.3. Insert D hole of the Vinyl Disc on the D shaft of the Motor.4. Fix the adapter with 2 screws (qhead).NOTEAfter completing the Platter installation, please be very careful duringtransportation.In order to avoid possible damage, do not transport upright or upsidedown.b A coffin case that holds down the platter area firmly by foam isrecommended for transportation.Taper Boss(Motor Unit)NOTE• Use the proper size screwdriver.• Do not over tighten the screws.