Denon DN-X300 Operating Instructions Manual

Also see for DN-X300: Operating instructions Service manual Service manual

Contents

7ENGLISHLRRL RLLR LRLRLRLRLRLRDN-X300AA-26AA-27DP-DJ151 DigitalQuartzANTI-SKATING76543210ONSLOWBRAKEOFFPOWERSTART/STOP45012343378+120-12PITCHKEY ADJUSTDP-DJ151 DigitalQuartzANTI-SKATING76543210ONSLOWBRAKEOFFPOWERSTART/STOP45012343378+120-12PITCHKEY ADJUST3 CONNECTIONSRefer to the connection diagram below.1. Make certain AC power is off while makingconnections.2. Quality cables make a big difference in fidelity andpunch. Use high-quality, audio cables.3. Do not use excessively long cables. Be sure plugsand jacks are securely fastened. Loose connectionscause hum, noise, or intermittents that coulddamage your speakers.4. Connect all stereo input sources. Then connect anyeffects into the stereo effect, if used. Connect yourmicrophone(s) and monitor headphones. Make sureall faders are at “zero” and the unit is off. Take careto connect only one cable at a time. pay attention toL and R position of jacks, on both the DN-X300 andoutboard gear.5. Connect the stereo outputs to the poweramplifier(s) and/or tape deck(s) and/or MDrecorder(s) and/or CD recorder(s). Plug the DN-X300into AC power outlet.MixerTurntable 2Main unbalanced power amplifierMain balanced power amplifierBooth unbalanced power amplifierCD player1/4” TRSmono jackNOTE:Always switch on your audio input sources such asCD players first, then your mixer, and finally anyamplifiers. When turning off, always reverse thisoperation by turning off amplifiers, then your mixer,and then input units.CD playerTurntable 13.5 mm stereo mini cord3.5 mm stereo mini cordEffects processor1/4” TS jack1/4” TRS jackBalanced microphoneEffects processor1/4” TS jack1/4” TS jack1/4” TS jack.1/4” TRS jack1/4” TRS jackAC adaptorTo power outletINSend(Tip)OUTReturn(Ring)NOTE:Use specified attached AC adaptor only.orAA-26 : for AC 120VAA-27 : for AC 230V