Denon DN-X300 Operating Instructions Manual

Also see for DN-X300: Operating instructions Service manual Service manual

Contents

9ENGLISH5 FADER STARTIf the separately sold DN-S5000, DN-S3000, DN-S1000 and etc. players are connected to LINE1, 2, 3 or 4, theycan be started using the source input fader (Ch. Fader) or Crossfader, as long as the 3.5 mm stereo mini cordshave been connected.RL RLRL RLFADERFADER FADERFADERPGM1FADERPGM1FADERPGM2FADERPGM2LINE2LINEOUT LINEOUTLINE4FADERDN-X300(1)-2, 5(1)-2, 5(2)-2, 5(1)-1(2)-4(1)-4(1)-1(1)-4(2)-1(2)-1Channel Fader StartTurn the CH 1/2 FADER START switches #8.12Crossfader StartNOTES:• When the CROSSFADER REVERSE switch is setto ON, the Crossfader's operating direction isreversed.• Channel Fader Start and Crossfader Start for thesame source will not operate simultaneously.You must select from either one. If both CHFADER START and CROSSFADER START A, Bswitches are ON, priority will be the cross fader.Move the Channel fader @1 ofCH-1 or CH-2 control all theway to the bottom.3 Set the standby mode on CD player.5When you want to start theplayer, move up the Channelfader @1 and the CD playerwill begin playing.12Slide the Crossfader @3 all the way in directionopposite the source you want to start. (In thefollowing example, startup is done with the CDplayer connected to PGM1.)5When the Crossfader @3 is slid in the oppositedirection, CD player play will begin.CD player (DN-S3000) CD player (DN-S3000)4Use the CH 1/2 FADERCONTOUR controls $1 tocontrol the Channel faderstartup curve.NOTE:• When the CH 1/2 FADER REVERSE switch is setto ON, the Channel fader's operating direction isreversed.Turn the CROSSFADER START A, B switches#9.3 Set the standby mode on CD player.4Use the CROSSFADERCONTOUR control $3 tocontrol the Crossfaderstartup curve.