Denon DND6000 - Dual DJ CD Player Operating Instructions Manual

Also see for DND6000 - Dual DJ CD Player: Operating instructions Operating instructions Service manual

Contents

8ENGLISH!0 PLAY/PAUSE button (13)• This button will start or pause playback.• Push once to start playback, once again topause playback, and once more to resumeplayback.!1 CUE button• Pushing this button in play mode will force thetrack back to the position which playbackstarted. While in search mode, it makes newCue point. (Cue)• In Cue mode, by pushing the CUE buttonmakes a Stutter sound from the Cue point. Thisis called Stutter play. (Stutter)!2 Scratch DiscUse this vinyl scratch disc for scan, manualsearch, Pitch Bend and Scratch operations.!3 FLIP/CLR button• FLIP:Use this to select operating mode of A1 and A2buttons, from Hot Start mode and Stuttermode. The display will indicate “H/S” or “STR”• A1, A2 CLR:If the A1 or A2 button is pushed while pushingthe FLIP button, you can clear the selected Apoint.By holding down just the FLIP button for morethan 1 sec, you can clear A1 and A2 points allat once.!4 (SAMP) RVS/CLR button• (SAMP)RVS:Use this to select the sample play directionforward and reverse. When select reverse RVSLED lights up.• (SAMP) CLR:If the SAMP button is pushed while pushingthe this button, you can clear the SAMP data.Or, by holding down just the this button formore than 1 sec.(3) RC-D60 Front panelCAUTION:• Note that there are many buttons working twodifferent function selected by short timepushing or long pushing (1second or more). Themark indicates short time push function andmark indicates long time push function.!5 A1, A2 button• Using this button you can create starting pointfor Hot Start, Seamless Loop and Stutter.!6 SAMP button• Push this button to record or play sound ofSampler.!7 B button• Use this to set the B point for to create aSeamless Loop after the A point has been set.!8 (SAMP) B button• Use this to set the Sampler loop B point.!9 EXIT/RELOOP button• Use this to exit or return back again toSeamless loop playback. You can add varietyto looping with this function.@0 (SAMP)EXIT/RELOOP• Use this to turn the Sampler Loop mode onand off. Also acts as EXIT/RELOOP button forSampler Loop to exit or back again.@1 NEXT TR./B TRIM button• When the button is pressed during playback,the NEXT TRACK MODE is selected. If thebutton is pressed again, the B TRIM MODE isselected.In the standby and pause modes, only the BTRIM MODE can be selected.@2 (SAMP.) STOP button• Push this button while in Sampler record orplayback, Sampler record or playback stops.@3 TITLE button• CD TEXT:When there is CD text data, the CD text datais displayed automatically or when the buttonis pressed.If no TEXT is available, the display will indicate“No TEXT”.• MP3:When an MP3 file has ID-3 tag data, the title,artist name and album name are selected anddisplayed each time the button is pressed.3 PART NAMES AND FUNCTIONS(1) Front panelq POWER button (¢ON £OFF)• Push this button to turn power on and off.w POWER indicator• This lights when the power is on.e Disc loading slot• Load the disc slowly, and release it once theDN-D6000 starts grabbing the disc in.r Disc slot LED• This flashes while the disc is ejecting.• The LED lights when the disc is not loaded andserves as the disc slot illumination.t DISC EJECT button• Push this button to eject the disc.• The disc will not eject during playback.Stop playback before pushing this button.y Analog output jacks(LINE OUT)• This is unbalanced RCA output jacks.• Audio signals outputs.u Fader start jack• Use this when your mixer has Fader Startfunction with 3.5 mm stereo mini cord.i Digital output jack• Digital data is available from this jack.• Use 75 Ω/ohms pin cord for connection.• We recommend you use braided wire typeshielded cable.NOTE: The playback level after analogconversion is set to -12dB bellow theusual level to avoid digital distortion.o Remote connector (REMOTE)• Connect this connector to the RC-D60 usingthe included cord.(2) Rear panelCAUTION:• Do not turn off the power while a disc isloading or being ejected. Otherwise loadingmechanism may be damaged.CAUTIONS:• Do not load discs when the power is turnedoff.• Do not try to forcibly remove a disc oncethe DN-D6000 has started to grab the disc.• Do not load more than once disc at a timeor insert anything other than discs.Otherwise loading mechanism may bedamaged.NOTE:Please clean the dirt of the label side of a discand start loading of the disc.The dirt causes a slip of a disc loader roller.