18Operation OperationUse [8] or [9] to select “1_off / E_on”, thenpress MENU/SET.• The timer standby indicator “ ” lights. The time is now set.For details, see “Operation of the everyday and once timers”.7Press or [POWER OFF].• The power is set to the standby mode and the power indicatorlights orange.When the timer start time is reached, the timer operates.8¢ If you make a mistake while setting the timer:qPress BAND at any step from 3 ~ 6.wUse MENU/SET to select the item you want to correct, them makethe correct setting.eUse MENU/SET to proceed to step 7.¢ To check the timer settings:qPerform steps 1 and 2 on page 17.wPress MENU/SET repeatedly.¢ To change the timer settings:Perform steps 1 ~ 8 at the left to change the settings as desired.The timer settings change to the new settings.To change a setting while still in the timer setting mode, pressBAND then perform steps 3 ~ 8 at on page 17 and above.¢ To delete the timer settings:qPerform steps 1 and 2 on page 17.wPress and hold BAND while “EVERYDAY” or “ONCE” is displayed.¢ To stop the timer setting:Select “1_off/E_off” at step 2 under “Operation of the everydayand once timers”.NOTE:• If the current time is not set, the timer standby indicator “ ”will not light.• When the timer is set, the timer standby indicator “ ” lights.• Be sure to set the power to the standby mode when you wantthe timer to operate.After setting the timer at “Setting the everyday or once timer” (page 17, 18), select the timer(s) you want to operate.Press MENU/SET twice.• The current settings are displayed.Use [8] or [9] to select the timer(s) you want tooperate.121 _ on / E _ on :1 _ off / E _ on :1 _ on / E _ off :1 _ off / E _ off : Neither the once nor the everydaytimer operates.Both the once and the everyday timersoperate.Only the everyday timer operates.Only the once timer operates.If only the everyday timer is set, the display switches as followswhen [8] or [9] is pressed.If only the once timer is set, the display switches as followswhen [8] or [9] is pressed.1 _ off / E _ on 1 _ off / E _ off1 _ off / E _ off 1 _ on / E _ off¢ If you do not want the timer to operate:Use [8] or [9] to turn off the timer standby indicator “ ”.Operation of the everyday and once timersTUNINGBANDFUNCTIONMENU/SETFUNCTIONSLEEP[CALL][NUMBER]MENU/SETBAND[ENTER/MEMO]TUNING[CLEAR/DEL][iPod 1/3][POWER OFF][9][8]About the button names in this explanation< > : Buttons on the main unit[ ] : Buttons on the remote control unitButton name only :Buttons on the main unit and remote control unitPress MENU/SET repeatedly until the menu displayturns off.3