Denon DVD-1930CI Operating Instructions Manual

Also see for DVD-1930CI: Specifications Specification Service manual

Contents

– 10 – ENFUNCTIONAL OVERVIEWLoading the BatteriesFront Panel DisplayDisplays During Operation1. Open the battery compartment cover.2. Insert two “AA” (R6P) batteries, with eachone oriented correctly.3. Close the cover.The present display state is shown.• TL./GR.: Title or Group• TR./CP.: Track or ChapterTo change to the display of a title please pushthe DISPLAY button in the state of Resume.Lights up when the inserted disc is being play back.Displays the chapter (title) or tracknumber. In case the chapter (title) ortrack number is over 100, displays“_ _”.Displays the elapsed time of the chapter (title) or track.(The display of 10 hours or more cannot be performed.)Selected HDMI output mode is displayed.Lights up when playing back in slow mode. (DVD)Lights up when the disc playback comes to a pause.Lights up when the progressive scan system is activated. Displays a type of the disc which is on the tray.• DVD: DVD-Video• DVD A: DVD-Audio• CD: Audio CD, MP3, JPEG, WMALights up when you have selected theaudio file (CD/MP3/WMA) on theprogram screen.Lights up when the repeat function is on.Lights up when the ALL repeat function is on.Lights up when the A-B repeat function is on.SACD: Super Audio CDSACDPower onNo disc inserted orcannot readHDMI output mode(480p) is selectedTray openTray closedLoading the DiscPower offHDMI output mode(720p) is selectedHDMI output mode(1080i) is selectedHDMI output mode(OFF) is selectedProgram playback issetProgram playback settinggroup (folder) is selectedProgram playback settingALL CLEAR is selectedRandom playback issetAll group playbackis setHDMI output mode(1080p) is selected Cautions On Batteries• Use “AA” (R6P) batteries in this remote control unit.• Replace the batteries with new ones approximate-ly once a year, though this depends on the fre-quency with which the remote control unit is used.• If the remote control unit does not operate within aclose proximity of the main unit, replace the batterieswith new ones, even if less than a year has passed.• The included batteries serve only for verifying operation.Replace them with new batteries as soon as possible.• When inserting the batteries, be careful to do so inthe proper direction, following the and marksin the remote control unit’s battery compartment.• To prevent damage or battery fluid leakage:• Do not mix a new battery with an old one.• Do not mix two different types of batteries suchas alkaline and manganese.• Do not short-circuit, disassemble, heat or dis-pose of batteries in flames.• Remove the batteries when not planning to usethe remote control unit for a long period of time.• If the batteries should leak, carefully wipe off the fluid from theinside of the battery compartment, then insert new batteries.NOTES:• The front panel display has blinked while setting theprogram playback.• “P**-●●●” is displayed in the front panel display whilesetting the program playback. (“**” is program number,“●●●” is track number.)• “A” is displayed in front panel display while selecting theaudio file (CD, MP3, WMA).• “F-***” is displayed in the front panel display while selectingthe group (folder). (“***” is group (folder) number.)• “A-CLEAr” is displayed in the front panel display whileselecting ALL CLEAR.• “SHUFFLE” is displayed in the front panel display whilesetting the random playback.