Denon DVD-1930CI Operating Instructions Manual

Also see for DVD-1930CI: Specifications Specification Service manual

Contents

– 26 – ENYou can change some Audio settings. It only affects during theplayback of DVD discs.Press the SETUP button in stop mode.Press the Cursor buttons (s or B) to selectCUSTOM, then press the ENTER button.• The custom mode will appear.Press the Cursor buttons (s or B) to selectAUDIO, then the ENTER button to confirm.Press the Cursor buttons (K or L) button to selectan item, then press the ENTER button.• This menu display contains 2 pages. Press the Cursorbutton (L) repeatedly to show the next page.DRC (Dynamic Range Control)(Default : ON)• DRC function compresses therange of sound volume.• DRC function is available only onthe discs that are recorded in theDolby Digital format.LPCM SELECT (Default : OFF)• Set to ON when outputting in48kHz (or 44.1kHz).• This function is available only ondigital outputting of a disc record-ed in over 96kHz (or 88.2kHz).• Sounds of the DVD-Audio whichexceed 96kHz (or 88.2kHz) will be output as 96kHz (or88.2kHz) even if LPCM SELECT is set to OFF.• This function is not effective for the HDMI sound output.When playing disc with copyright protection• The sound will be down sampled at 48kHz (44.1kHz),even if you set to OFF.DOLBY DIGITAL(Default: BITSTREAM)• Set to BITSTREAM when the play-er is connected to a Dolby Digitaldecoder.• This function is effective only forthe COAXIAL, OPTICAL and HDMIconnections.BITSTREAM:DOLBY DIGITAL signals are output as Bitstream.• For HDMI connection, if the connected equipmentis not compatible with the Dolby DigitalBITSTREAM, the signals are output as PCMregardless of the setting.PCM: Convert Dolby Digital to PCM.DTS(Default : BITSTREAM)• Set to BITSTREAM when the unitis connected to a DTS decoder.BITSTREAM:DTS signals are output asBitstream.• For HDMI connection, if the connected equipment isnot compatible with the DTS Bitstream, the signalsare output as PCM regardless of the setting.PCM: Convert DTS to PCM.QUICKQUICK4321DVD SETUPAudio SettingAUDIODRC ONLPCM SELECT OFFDOLBY DIGITAL BITSTREAMDTS BITSTREAMBASS ENHANCER OFFAUDIO MODE HDMIHDMI AUDIO 2 CHANNELAUDIODRC ONLPCM SELECT OFFDOLBY DIGITAL BITSTREAMDTS BITSTREAMBASS ENHANCER OFFAUDIO MODE HDMIHDMI AUDIO 2 CHANNELBASS ENHANCER (Default: OFF)• Set to ON for sound output on thebass-woofer channel when 2-chan-nel audio source is played back.• This function is effective only for the5.1ch AUDIO OUT jacks. Set theAUDIO MODE to ANALOG andANALOG AUDIO to MULTI CHANNEL to set this function.• When SUB WOOFER is set to NONE in the SpeakerConfiguration, BASS ENHANCER will be set to OFFautomatically.AUDIO MODE (Default: HDMI )• Select the sound is output fromwhether HDMI jacks or 5.1chAUDIO OUT jacks.HDMI: Sound is output via HDMIconnection. Output from5.1ch AUDIO OUT connection may be restricted.ANALOG: Sound is output via 5.1ch AUDIO OUT jacks.Output from HDMI connection is cut off.• Set to ANALOG when Super Audio CD is played back.HDMI AUDIO (Default: 2 CHANNEL)• Select the number of channels forHDMI audio output between 2CHANNEL and MULTI CHANNEL.• Refer to the table on page 15 forthe actual output settings.• Connect appropriate externalequipment for each setting and set AUDIO MODE toHDMI beforehand to perform this setting.2 CHANNEL:2 channel signals are output from HDMI jack. Suitablefor monitors or projectors compatible with HDMI 2CH.MULTI CHANNEL:Multi channel signals are output from HDMI jack.Suitable for monitors or amplifiers compatible withHDMI multi channels.• When MULTI CHANNEL is selected, the Speaker settingmenu for HDMI AUDIO will appear (refer to page 27).ANALOG AUDIO (Default : 2 CHANNEL)• Set AUDIO MODE to ANALOG beforehand to performthis setting.• 2 CHANNEL : Output 2ch sound from the 5.1ch AUDIOOUT jacks.• MULTI CHANNEL : Output Multi channel sound fromthe 5.1ch AUDIO OUT jacks.Press the SETUP button to exit and activate thenew settings.5AUDIODRC ONLPCM SELECT OFFDOLBY DIGITAL BITSTREAMDTS BITSTREAMBASS ENHANCER OFFAUDIO MODE HDMIHDMI AUDIO 2 CHANNELAUDIODRC ONLPCM SELECT OFFDOLBY DIGITAL BITSTREAMDTS BITSTREAMBASS ENHANCER OFFAUDIO MODE HDMIHDMI AUDIO 2 CHANNELAUDIODRC ONLPCM SELECT OFFDOLBY DIGITAL BITSTREAMDTS BITSTREAMBASS ENHANCER OFFAUDIO MODE HDMIHDMI AUDIO 2 CHANNELAUDIODRC ONLPCM SELECT OFFDOLBY DIGITAL BITSTREAMDTS BITSTREAMBASS ENHANCER OFFAUDIO MODE HDMIHDMI AUDIO 2 CHANNELAUDIODRC ONLPCM SELECT OFFDOLBY DIGITAL BITSTREAMDTS BITSTREAMBASS ENHANCER OFFAUDIO MODE HDMIHDMI AUDIO 2 CHANNELAUDIOANALOG AUDIO2 CHANNELMULTI CHANNELAUDIOANALOG AUDIO 2 CHANNELSpeaker Setting for ANALOG AUDIOWhen MULTI CHANNEL is selected for ANALOG AUDIO,some speaker settings will be required.• Set AUDIO MODE to ANALOG beforehand to performthis setting.Press the Cursor buttons (K orL) to select MULTI CHANNEL,then press the ENTER button.Press the Cursor buttons (K orL) to select the below items,then press the ENTER button.• The custom mode will appear.21AUDIOMULTI CHANNELSpeaker ConfigurationDELAY TIMECHANNEL LEVELAUDIODRC ONLPCM SELECT OFFDOLBY DIGITAL BITSTREAMDTS BITSTREAMBASS ENHANCER OFFAUDIO MODE HDMIHDMI AUDIO 2 CHANNELAUDIOANALOG AUDIO 2 CHANNEL