Denon DVD-1930CI Operating Instructions Manual

Also see for DVD-1930CI: Specifications Specification Service manual

Contents

Press the SUPER AUDIO CD SET UP buttonrepeatedly to select among MULTI-CH AREA, CDAREA, or 2CH AREA.MULTI-CH AREA - Playback in multi channel format.Thenumber of channels depends on the discbeing played.CD AREA - Playback in the same quality with soundas normal CDs.2CH AREA - Playback in higher quality than that ofnormal CD sound.NOTES:• The Virtual Surround setting is not available for SuperAudio CDs. (It may be possible to use the Virtual Surroundsetting when playing back discs that include a CD area.)• Some playback options may not be available.These willbe skipped.• MULTI-CH AREA is selected as default.1SuperAudio CDThis function allows you to select a desired sound mode dur-ing DVD-Audio playback.Press the AUDIO button during playback.Press the AUDIO button repeatedly to select yourdesired sound.NOTE:• When selecting a multi-channel sound, it maynot mixed down insome cases eventhough the HDMIAUDIO or ANALOGAUDIO is 2 CHANNEL.21DVD-A– 24 – ENYou can enjoy surround-sound effect with two speakers.During playback, press theMODE button repeatedly until theVirtual Surround setting appears.Press the ENTER button to set it 1(Natural effect),2(Emphasized effect) or OFF.Press the RETURN button to exit.NOTES:• Select Virtual Surround OFF or lower the volume if thesound is distorted.• Virtual Surround will not be effective if the sound modeis set to something other than STEREO (for Audio CDplayback only).• This function cannot be used during Dialog Speed(refer to page 23).• Set HDMI AUDIO and ANALOG AUDIO to 2 CHANNELto use this function.• The Virtual Surround setting is not available for SuperAudio CDs. (It may be possible to use the Virtual Surroundsetting when playing back discs that include a CD area.)321WMAMP3CDDVD-ADVD-VVirtual SurroundAdjust the Black Level Setting to make the black parts of thepicture as bright as you prefer.During playback, press theMODE button repeatedly untilBlack Level setting appears.Press the ENTER button to switch ON/OFF.ON (Default) : Makes the dark parts brighter.OFF : Shows the original picture as recorded.Press the RETURN button to exit.NOTE:• This function cannot be used during Dialog Speed(refer to page 23).321DVD-ADVD-VBlack Level SettingONPress the AUDIO button repeatedly during play-back to select your desired sound mode.STEREO - both right and left channels are active (stereo)L-ch - only left channel is activeR-ch - only right channel is activeNOTE:• The STEREO can only be output when playing backDTS CD.1CDStereo Sound ModeBoth right and left channelsare active (stereo).Only the left channelis active.STEREOL-chR-chOnly the right channelis active.DISC PLAYBACKOFF1.LPCM 3/2.1ch 96k/22.PPCM 2/0ch 96k/2Picture ControlPicture Control adjusts Brightness, Contrast, Color, GammaCorrection and Sharpness of the specific display.During playback, press theMODE button.Press the Cursor buttons (Kor L) to switch among items.Press the ENTER button or the Cursor buttons (s orB) to adjust the selected item to a desired level.• -6, -5, -4, -3, -2, -1, 0, +1, +2, +3, +4, +5, +6 can be selected.To return to normal playback, press the RETURNbutton.NOTES:• The default settings for all items in Picture Control are “0”.• The setting display will disappear in 10 seconds of no use.• This function cannot be used during Dialog Speed(refer to page 23).• If you return all items to the default settings pleaseexecute initialize.4321DVD-ADVD-VBRIGHTNESS s+1BSound ModeSACDSACDMULTI-CH AREACD AREA2CH AREAfront panel displayNOTE:• If the ANGLE ICON setting is OFF in the Display menu,the ( ) will not appear.