Denon DVD-1940CI Operating Instructions Manual

Also see for DVD-1940CI: Specifications Dimensions Specification Service manual Instrucciones de funcionamiento

– 28 – ENDVD SETUPDisplay SettingYou can change certain aspects of the DVD display screens,still mode, TV Type, Progressive and HDMI settings.Press the SETUP button in stop mode.Press the Cursor buttons (s or B) to selectCUSTOM, then press theENTER button.• The custom mode will appear.Press the Cursor buttons (s orB) to select DISPLAY, then pressthe ENTER button to confirm.Press the Cursor buttons (K orL) to select an item, then press the ENTER button.TV ASPECT (Default : 4:3 LETTER BOX)• Press the Cursor buttons (K orL) for an item selection, thenpress the ENTER button.• Select 4:3 LETTER BOX for ablack bars appears on top and bot-tom of the screen.• Select 4:3 PAN & SCAN for a fullheight picture with both sidestrimmed.• Select 16:9 WIDE if a wide-screen TV is connected to theDVD player.• Select 4:3 SQUEEZE when the TV screen is too large hor-izontally at 16:9 WIDE setting and when it is impossible toadjust the screen size using the TV’s controls.QUICK4321In Setup menu, QUICK mode, CUSTOM mode and INITIALIZE mode are available (refer to pages 28-32).QUICK mode consists of the setting menus frequently used, and they are accompanied with mark.You can make all settings in CUSTOM mode.QUICKLanguage setting can be varied with some DVDs or DivX®Subtitles recorded in discs.Press the SETUP button in stop mode.Press the Cursor buttons (s or B) to selectCUSTOM, then press the ENTER button.• The custom mode will appear.Press the Cursor buttons (sor B)to select LANGUAGE, then pressthe ENTER button to confirm.Press the Cursor buttons (K orL) to select an item, then pressthe ENTER button.DIALOG (Default : ORIGINAL)• Sets the audio language.SUBTITLE (Default : OFF)• Sets the subtitle language.DISC MENU (Default : ENGLISH)• Sets the language for DVD Menu and title menu (for DivX®).OSD (Default : ENGLISH)• Sets the language for the On-Screen display.DivX SUBTITLE (Default: OFF)• Sets the DivX ® subtitle language.Press the Cursor buttons (K or L) to select a set-ting, then press the ENTER button.• If OTHER is selected in the DIALOG, SUBTITLE orDISC MENU, press four-digit number to enter thecode for the desired language (refer to the lan-guage code list on page 32).• Only the languages supported by the disc can be selected.Press the SETUP button to exit and activate thenew settings.NOTE:• Language Setting for DIALOG and SUBTITLE may notbe available with some discs. Then use the AUDIO andSUBTITLE buttons. Details are on page 26.65QUICK4321Language SettingDISPLAYTV ASPECT 4:3 LETTER BOXSTILL MODE AUTOTV TYPE MULTIPROGRESSIVE OFFPROG.MODE AUTO1HDMI SELECT YCbCrHDMI PICTURE NORMALDISPLAYTV ASPECT4:3 LETTER BOX4:3 PAN & SCAN16 :9 WIDE4:3 SQUEEZELANGUAGEDIALOG ORIGINALSUBTITLE OFFDISC MENU ENGLISHOSD ENGLISHDivX SUBTITLE OFFSTILL MODE (Default : AUTO)• Press the Cursor buttons (K orL) for an item selection (AUTO,FIELD, or FRAME), then pressthe ENTER button.• This function allows you toadjust picture resolution andquality in still mode.• An individual picture on TV screen is called as “frame”,which consists of two separate images called as “field”.Some pictures may be blurred at the AUTO setting instill mode due to their data characteristics.• AUTO: Automatically selects the best resolution set-ting (FRAME or FIELD) based on the datacharacteristics of the pictures.• FIELD: Select FIELD when the pictures are still unsta-ble even if AUTO is selected. FIELD stabilizesthe pictures, although the picture quality maybecome coarse due to the limited amount ofdata.• FRAME: Select FRAME to display relatively motionlesspictures in higher resolution. FRAME improvesthe picture quality, although it may unstabilizethe pictures due to simultaneous output of twofield data.TV TYPE (DEFAULT: MULTI)• Press the Cursor buttons (K orL) to select a setting, thenpress the ENTER button.• Select a video system settingbetween MULTI, NTSC andPAL.• NTSC: Select this when your TV’s video format isNTSC. If NTSC is selected, output format isfixed to NTSC.• PAL: Select this when your TV’s video format is PAL.If PAL is selected, output format is fixed to PAL.• MULTI: Automatically selects the suitable video out sys-tem (PAL/NTSC) according to the format of theinserted disc.- For the discs recorded with NTSC system, the NTSCsignal will be output and pictures of the discs can beviewed on an NTSC or Multi system TV.- For the discs recorded with PAL system, the PAL sig-nal will be output and pictures of the discs can beviewed on a PAL system TV or Multi system TV.NOTES:• If the AC power cord is disconnected while the unit isturned on, the video format of opening screen isaltered. To keep the format, turn the unit off beforeunplugging the AC power cord.• When PAL signal is output from this unit, the image ofon-screen display will be distorted or will not be dis-played at all. To bring back the on-screen display, selectMULTI using the DIMMER NTSC/PAL button on thefront panel then play a disc recorded in NTSC system,or select NTSC. Refer to TV TYPE on page 17.PROGRESSIVE(Default: OFF)• Press the Cursor buttons (K orL) to set PROGRESSIVE to ONor OFF, then press the ENTERbutton.• The setting will be effectivewhen you exit the setup screen by pressing the SETUPbutton.• When PROGRESSIVE is ON, P.SCAN appears on theDVD player’s display after you exit the setup screen.• Refer to page 12 for more details.• In the HDMI output mode, even when PROGRESSIVEis set to ON, signals are output always as Interlace.QUICK DISPLAYTV ASPECT 4:3 LETTER BOXSTILL MODE AUTOTV TYPE MULTIPROGRESSIVE OFFPROG.MODE AUTO1HDMI SELECT RGBHDMI PICTURE NORMALDISPLAYTV TYPENTSCPALMULTIDISPLAYAUTOFIELDFRAMESTILL MODE