05 PART NAMES AND FUNCTIONSPOWER buttonl Press once to turn the power on.l Press again to set to the “OFF” position and turn the poweroff.l Set the power to the standby mode by pressing the POWERbutton on the remote control unit while the power is on.l Turn the power on from the standby mode by pressing thePOWER button on the remote control unit.Power indicatorl This indicator lights when the power is on and when thepower is In the standby mode.RANDOM buttonl Press this button to begin random play.l Pressing this button during stop, and press play button playto full automatic random play. 3l This button does not work when playing DVDs.REPEATbuttonl Press this button for repeated playback. (Refer to page 32 fordetails.)DISC SKIP buttonl Each time this button is pressed, the carousel will rotate in aclockwise direction to the next tray position. This allows forloading or unloading of discs.l This button is also used to select the next disc, in the normalplay continuously.Remote control sensor (REMOTE SENSOR)Displayl Information on the disc that IS currently playrng IS shown onthe display. (See page 16.)SKIP button (I441l Press thus to move back to the begrnning of the current track(or chapter).l Press again to move back to the begrnnrng of the previoustrack (or chapter).PLAY button (F)l Press this to play the disc.SKIP button (ml)l Press this to move ahead to the beginning of the next track(or chapter).STILL/PAUSE button (II)l Press this button to stop play temporarily.SLOW/SEARCH button (44)l Press this button in the play mode to search in the reversedirection.l Press the button in the still mode for slow play in the reversedirection.STOP button (HIl Press thus to stop the disc. (See page 23.)SLOW/SEARCH button (h, 1l Press the button In the play mode to search in the forwarddirection.l Press the button in the stall mode for slow play in the forwarddirectron.OPEN/CLOSE button (4l Press this button to open and close the disc tray.@ Disc number button (I-5)l Press these button to specify which disc you want to play.@ Disc tray (I-5)Load discs here.Press the OPEN/CLOSE button @to open and close the disctray.The disc tray is also closed when the PLAY button @ ispressed.Video output connector (VIDEO OUT)l Connect using the included video cord.S-Video output connector (S-VIDEO OUT)l Connect using an S-Video connection cord (available instores).Component video output connectors (COMPONENT)l Connect using video cords (available in stores).Subwoofer connectorl Connect using an audio cord (available to stores) to the activesubwoofer.ANALOG OUT connectorsl Connect these to the input connectors of an amplifier, etc.,to hear the sound of the DVM-1800 over the speakersthrough the amplifier.Digital audio output connector (COAXIAL)l Connect using an audio cord. Connect a commerciallyavailable 75 Q/ohms pin-plug cord.l Digital data is output from this connector.Digital audio output connector (OPTICAL)l Connect using an optical fiber cable (available in stores).l Digital data IS output from this connector.Remote control input connector(REMOTE CONTROL IN)l This is the Input connector for wired remote control.Consult your DENON dealer if you wish to use thisconnector.Remote control output connector(REMOTE CONTROL OUT)l This is the output connector for wired remote control.Consult your DENON dealer if you wish to use thisconnector.Power cordl Plug this into a wall power outlet.15