016 CHANGING THE DEFAULT SETTINGSH The default values preset upon shipment from the factory can be changed.The default settings are retained until they are agaln changed, even if the power is turned off.In the stop mode, press the SET UP button.l The default setting screen appears.1. Disc LanguagesUse this to set the language to be used when playing the disc.If the set language is not offered on that disc, the disc’s defaultlanguage IS set.2. RatingsSET UP%Remote control unitUse this to disable playback of adult DVDs so that children cannotwatch them. Note that playback of adult DVDs cannot be disabled If therating level is not recorded on the DVD, but that it is possible to disableplayback of all DVDs.3. Menu LanguageUse this to set the language for the default setting screen and1 messages displayed on the TV screen (“PLAY”, etc.).4. On-Screen MessagesUse this to set whether or not to display messages (“PLAY”, etc.) onthe TV screen.5. FL DisplayUse this to set the brightness of the display.6. TV AspectSet thts according to the size of the connected TV’s screen (4:3 or 16:9).7. Digital Audio Output9 Other SettingsPress RETURNtoUse this to set the audio signals output from the digital audio outputconnectors.9. Other SettingsThese include special settings such as audio dynamic rangecompression.AUse the A and 7 cursor buttons to select the desired setting, then pressthe ENTER button.l Select “1 Disc Languages”. (See page 44.) %IENTER)l Select “2 Ratings”. (See pages 45, 46 and 47.)2 l Select “3 Menu Language”. (See page 48.) al Select “4 On-Screen Messages”. (See page 49.) Remote control unitl Select “5 FL Display”. (See page 51.)l Select “6 TV Aspect”. (See page 52, 53 and 54.) ENTERl Select “7 Digital Audio Output”. (See pages 55 and 56.)l Select “9 Other Settings”. (See pages 57 and 58.)p-.Remote control unitNOTE:l When the player is set to the “Lock All” setting in “2 Ratings”, none of the initial setting, including “2 Rating”, can be changed if the DVDdisc is left inside the player. In this case, remove the disc, and then operate the player.43