Denon DVM-2815 Operating Instructions Manual

Contents

– 13 – ENEnglishConnection to an audio systemStereo systemNOTES• If output Dolby Digital audio, connect to a Dolby Digital decoder, and set Dolby Digital to on for audio output in the setupmode. (See page 26)• If output DTS audio, connect to a DTS decoder, and set DTS to ON for audio output in the setup mode. (See page 26)• Unless connected to a Dolby Digital decoder, or a DTS decoder, set Dolby Digital or DTS to OFF for audio output in the setupmode. Playing a DVD using incorrect settings may generate noise distortion, and may also damage the speakers. (See page 26)• The audio source on a disc in a 5.1 channel Dolby Digital surround format cannot be recorded as digital sound by an MD orDAT deck.• Set Dolby Digital and DTS to OFF for audio output in the setup mode for method 1 only. Playing a DVD using incorrect settingsmay generate noise distortion, and may also damage the speakers. (Refer to page 26 to set ON for Dolby Digital and DTS)AUDIODVDAudio Input Jacks Digital Audio InputJacksAnalog Audio Out Digital Audio Out• Method 1 DVD Player + Stereo system• Method 2 DVD Player + Dolby Digital decoder or DTS decoderDolby Digital decoderorDTS decoderMethod 1 Method 2HOOK UPSThe following show examples of connections commonly used to connect the DVD player either TV and othercomponents.If using this DVD player to playback a DVD in a 5.1 channel Dolby Digital surround or DTS surround format, theDVD player outputs a Dolby Digital or DTS data stream from its OPTICAL or COAXIAL DIGITAL AUDIO OUTjacks. 5.1 channel Dolby Digital Surround sound and DTS sound can also be output from the 5.1 CH OUTPUTjacks. By hooking the player up to a Dolby Digital or DTS decoder, you can enjoy a more convincing, realisticambience with powerful and high-quality surround sound of a professional standard, which can be heard inmovie theaters. Use an audio coaxial or optical digital cable (not included) for the audio connections. Use audiocables (commercially available ) for the 5.1 CH audio connection.Notes¡Be sure to turn off the power to all components in the system before connecting another component.¡Refer to the Instruction Manuals for your TV, stereo system and any other components to be connected to theDVD player.