Denon DVM-2815 Operating Instructions Manual

Contents

– 23 – ENEnglishPLAYING A DISCThe DVD player allows you to selecta language for subtitle during DVD disc (if available) playback.Press the SUBTITLE button during playback.Press the SUBTITLE button repeatedly to selectyour desired subtitle language.• The selected language will be displayed on the displaybar at the top of the screen.To turn off subtitles, press the SUBTITLE buttonrepeatedly until OFF appears.NOTES:• Some discs allow audio language setting/subtitle languagesetting on the disc menu. (Operation varies between discs,so refer to the manual accompanying the disc.)• If the desired language is not shown after pressing theSUBTITLE button several times, the disc does not have subtitlesin that language.• If you choose a Language that has a 3-letter languagecode, the code will be displayed every time you change theSubtitle language setting. If you choose any other lan-guages, ‘---’ will be displayed instead. (Refer to page 28.)321DVD-VSubtitle LanguageSubtitle 1Subtitle 2OFF1.ENG/62.FRE/6OFFPress the AUDIO button repeatedly during play-back to select between STEREO, L-CH or R-CH.STEREO - both right and left channels are active (stereo)L-CH - only left channel is activeR-CH - only right channel is activeNOTES:• If the Virtual Surround setting is ON, the sound mode willbe fixed to STEREO, and can not be changed.• Stereo sound mode will not be changed when playing DTS CD.1VCDCDStereo Sound ModeBoth right and left channelsare active (stereo).Only the left channelis active.STEREOL-CHR-CHOnly the right channelis active.Some DVD discs contain scenes which have been shot simulta-neously from various angles. You can change the camera anglewhen the ( ) mark appears on the screen.Press the ANGLE button during playback.• The selected angle will be displayed on the display barat the top of the screen.Press the ANGLE button repeatedly to select yourdesired angle .21DVD-VCamera AngleAngle 1Angle 2Angle 81 / 82 / 88 / 8Changing the On-Screen DisplayYou can check information about the current disc by pressingthe DISPLAY button on the remote control.Press the DISPLAY buttononce during playback to showcurrent Disc number.• The current disc number will bedisplayed.Press the DISPLAY buttontwice during playback to showcurrent Chapter.• The elapsed and remaining play-ing time of the current chapterwill be displayed.Press the DISPLAY buttonthree times to show currentTitle.• The elapsed and remaining play-ing time of the current title will bedisplayed.Press the DISPLAY button fourtimes.• The BIT RATE and the currentrepeat setting will be displayed.• If you are playing a dual layereddisc, the layer number will alsobe displayed ( L0: Layer 0 is play-ing. L1: Layer 1 is playing).Press the DISPLAY button five times to remove thedisplay.54321DVD-VIIII TDVD9/49 0:00:00 -0:00:001/5 0:00:00 -0:00:00