SETTING UP YOUR FIRST HEOS SPEAKEROnce you have placed your speaker in your listening room and have downloaded the HEOS app, you are ready to configure your speaker for musicplayback. This involves following a few simple steps to get the speaker connected to your existing home network:CautionDO NOT connect the Ethernet cable if you are connecting your speaker to a wireless network. If you are connecting the speaker to a wired network, usean Ethernet cable to connect the speaker to your network or router.1 Make sure your mobile device is connected to yourwireless network (the same network you want yourspeakers connected to). You can check this in theSettings - Wi-Fi menu of your iOS or Android device.NOTEIf your wireless network is secure, make sure you know the password to joinyour network.2 Make sure you have the includedAudio/Setup cable handy.3 Launch the HEOS app on yourmobile device.4 Tap the “Setup Now” button at the top of the screen.5 Follow the instructions to add the speaker to yourwireless network. (The Wi-Fi settings from your mobiledevice will be copied to the speaker via the audiocable.)NOTEIf you have any problems connecting your HEOS device, jump to theTroubleshooting section (v p. 47).Contents Setup Use Troubleshooting Status LED AppendixSetup16
