Playing music from the AUX input1 Connect an audio device with a 3.5 mm stereo audiooutput to the AUX input on your speaker using theincluded 3.5 mm stereo audio cable.2 Select “AUX Input” from the Music tab.3 Select the name of the speaker to which you connectedthe audio device in step 1.4 Initiate playback on the audio device.5 The sound from the audio device can be played directlyon the selected speaker or digitized and sent over yournetwork to other speakers.NOTEThe analog output signals from some sources can be fairly strong. If the input level ofthe source device is turned up high, it could overload the inputs of the HEOS device.This is unlikely to cause damage, but can cause distorted sound. Initially, set thevolume of the source to a medium – low level, then turn it up as needed. If you heardistortion, turn down the device's volume control. .Audio signalContents Setup Use Troubleshooting Status LED Appendix21
