BASIC TROUBLESHOOTINGNo soundSolution Refer to Page0 Is HEOS HomeCinema’s volume turned up? (Don’t laugh; we do this one ourselves all the time.) －0 Is HEOS HomeCinema muted (if so, the front LED is slowly blinking.). －0 Is the audio source a volume-controlled television or cable/satellite box output? If so, you must turn up the volume of thetelevision or cable/satellite box to send adequate signal-level to HEOS HomeCinema. (For this reason it is best to choose fixed-level outputs where possible; some televisions have separate physical outputs, other employ on-screen menu settings tomanage this.)－0 Check connections: remember that HEOS HomeCinema auto-prioritizes multiple incoming signals, selecting HDMI, optical-digital, coaxial-digital, and analog-mini plug, in that order. Confirm that the television is routing audio to the appropriate output;there may be TV-menu settings to manage this.－No subwoofer sound, sound interrupted, or noise occurringSolution Refer to Page0 Check that the Status LED is lit in blue on the subwoofer. When the Status LED is lit in amber, disconnect from the wall outletand then reconnect to it, or try to pair again.500 When there is an obstacle between the soundbar and the subwoofer, remove it or place the subwoofer closer to the soundbar. －Contents Setup Use Troubleshooting Status LED AppendixTroubleshooting52
