0Getting Started Connections Operation TroubleshootingENGLISHn Power amplifier sectionRated Output Power: 2-channel driving (CD → SP OUT)50 W + 50 W (8 Ω/ohms, 20 Hz ~ 20 kHz, T.H.D. 0.07 %)Dynamic power: 85 W + 85 W (4 Ω/ohms, DIN, 1 kHz, T.H.D. 0.7 %)High frequency distortion: 0.01 % (Rated output: –3 dB), 8 Ω/ohms, 1 kHzOutput terminals: Speaker A or B: 4 ~ 16 Ω/ohmsA + B: 8 ~ 16 Ω/ohmsSuited for headphones/stereo headphonesn Pre amplifier sectionEqualizer amplifier output: 150 mV(REC OUT terminals)Input Sensitivity/Input Impedance: PHONO (MM): 2.5 mV/47 kΩ/kohmsCD, TUNER, LINE, RECORDER-1, RECORDER-2:105 mV/47 kΩ/kohms (SOURCE DIRECT OFF)105 mV/13 kΩ/kohms (SOURCE DIRECT ON)RIAA Deviation: PHONO (MM): 20 Hz ~ 20 kHz ±0.5 dBn Overall performanceSN Ratio (A network): PHONO (MM): 86 dB(With input terminals short-circuited, 5 mV input signal)CD, TUNER, LINE, RECORDER-1, RECORDER-2:107 dB (input terminals short-circuited)Tone control (bass): BASS: 100 Hz ±8 dBTREBLE: 10 kHz ±8 dBLOUDNESS: 100 Hz: +6 dB, 10 kHz: +6 dBn GeneralPower supply: AC 230 V, 50 HzPower consumption: 200 W0.3 W (Standby)Power outlets: 3 switched outlets, total capacity 100W (0.43A)Maximum external dimensions: 434 (W) x 121 (H) x 307 (D) mmWeight: 6.7 kgn Remote control unit (RC-1131)Batteries: R03/AAA Type (two batteries)Maximum external dimensions: 49 (W) x 220 (H) x 21 (D) mmWeight: 120 g (including batteries)z: For purposes of improvement, specifications and design are subject to change without notice.SpecificationsSpecificationsIndexAAdjust the tone......................................................8Adjust the volume .................................................8BBALANCE ..............................................................3BASS .....................................................................3Batteries ................................................................2Bi-wiring Connection .............................................6CCables Used for Connections ...............................5Connecting Players ...............................................6Connecting Recorders ..........................................7Connecting the Speakers ......................................5Copying Recorders................................................8IINPUT SELECTOR .................................................8LLOUDNESS............................................................3PPower cord ............................................................7Protection circuit ...................................................5SSOURCE DIRECT...................................................3Speaker cables ......................................................5SPEAKERS A/B ......................................................3Stereo pin-plug cable ............................................5TTREBLE .................................................................3VVOLUME ................................................................3