Denon RCD-M33 Operating Instructions Manual

Also see for DM33S - Micro System: Specifications Specification Specification

Contents

Denon RCD-M33 Operating Instructions Manual Manual pdf 2 page image

2IMPORTANT TO SAFETYWARNING:TO PREVENT FIRE OR SHOCKHAZARD, DO NOT EXPOSE THISAPPLIANCE TO RAIN OR MOIS-TURE.CAUTION:1. Handle the power supply cord carefullyDo not damage or deform the power supply cord.If it is damaged or deformed, it may cause electricshock or malfunction when used. When removingfrom wall outlet, be sure to remove by holding theplug attachment and not by pulling the cord.2. Do not open the top coverIn order to prevent electric shock, do not open thetop cover.If problems occur, contact your DENON DEALER.3. Do not place anything insideDo not place metal objects or spill liquid inside thesystem.Electric shock or malfunction may result.NOTE:This system uses the semiconductor laser. To allowyou to enjoy music at a stable operation, it isrecommended to use this in a room of 5 °C (41 °F) ~ 35°C (95 °F).CAUTION:USE OF CONTROLS OR ADJUSTMENTS ORREFORMANCE OF PROCEDURES OTHER THANTHOSE SPECIFIED HEREIN MAY RESULT INHAZARDOUS RADIATION EXPOSURE.THE COMPACT DISC PLAYER SHOULD NOT BEADJUSTED OR REPAIRED BY ANYONE EXCEPTPROPERLY QUALIFIED SERVICE PERSONNEL.SAFETY INSTRUCTIONS1. Read Instructions – All the safety and operatinginstructions should be read before the product isoperated.2. Retain Instructions – The safety and operatinginstructions should be retained for future reference.3. Heed Warnings – All warnings on the product and inthe operating instructions should be adhered to.4. Follow Instructions – All operating and useinstructions should be followed.5. Cleaning – Unplug this product from the wall outletbefore cleaning. Do not use liquid cleaners or aerosolcleaners.6. Attachments – Do not use attachments notrecommended by the product manufacturer as theymay cause hazards.7. Water and Moisture – Do not use this product nearwater – for example, near a bath tub, wash bowl,kitchen sink, or laundry tub; in a wet basement; ornear a swimming pool; and the like.8. Accessories – Do not place this product on anunstable cart, stand, tripod, bracket, or table. Theproduct may fall, causing serious injury to a child oradult, and serious damage to the product. Use onlywith a cart, stand, tripod, bracket, or tablerecommended by the manufacturer, or sold with theproduct. Any mounting of the product should followthe manufacturer’s instructions, and should use amounting accessory recommended by themanufacturer.9. A product and cart combinationshould be moved with care.Quick stops, excessive force,and uneven surfaces may causethe product and cart combinationto overturn.10. Ventilation – Slots and openingsin the cabinet are provided forventilation and to ensure reliable operation of theproduct and to protect it from overheating, and theseopenings must not be blocked or covered. Theopenings should never be blocked by placing theproduct on a bed, sofa, rug, or other similar surface.This product should not be placed in a built-ininstallation such as a bookcase or rack unless properventilation is provided or the manufacturer’sinstructions have been adhered to.11. Power Sources – This product should be operatedonly from the type of power source indicated on themarking label. If you are not sure of the type ofpower supply to your home, consult your productdealer or local power company. For productsintended to operate from battery power, or othersources, refer to the operating instructions.12. Grounding or Polarization – This product may beequipped with a polarized alternating-current line plug(a plug having one blade wider than the other). Thisplug will fit into the power outlet only one way. Thisis a safety feature. If you are unable to insert the plugfully into the outlet, try reversing the plug. If the plugshould still fail to fit, contact your electrician to replaceyour obsolete outlet. Do not defeat the safetypurpose of the polarized plug.FIGURE AEXAMPLE OF ANTENNA GROUNDINGAS PER NATIONALELECTRICAL CODE ANTENNALEAD INWIREGROUNDCLAMPELECTRICSERVICEEQUIPMENTANTENNADISCHARGE UNIT(NEC SECTION 810-20)GROUNDING CONDUCTORS(NEC SECTION 810-21)GROUND CLAMPSPOWER SERVICE GROUNDINGELECTRODE SYSTEM(NEC ART 250, PART H)NEC - NATIONAL ELECTRICAL CODE13. Power-Cord Protection – Power-supply cords shouldbe routed so that they are not likely to be walked onor pinched by items placed upon or against them,paying particular attention to cords at plugs,convenience receptacles, and the point where theyexit from the product.15. Outdoor Antenna Grounding – If an outside antenna orcable system is connected to the product, be sure theantenna or cable system is grounded so as to providesome protection against voltage surges and built-upstatic charges. Article 810 of the National ElectricalCode, ANSI/NFPA 70, provides information withregard to proper grounding of the mast and supportingstructure, grounding of the lead-in wire to an antennadischarge unit, size of grounding conductors, locationof antenna-discharge unit, connection to groundingelectrodes, and requirements for the groundingelectrode. See Figure A.16. Lightning – For added protection for this productduring a lightning storm, or when it is left unattendedand unused for long periods of time, unplug it fromthe wall outlet and disconnect the antenna or cablesystem. This will prevent damage to the product dueto lightning and power-line surges.17. Power Lines – An outside antenna system should notbe located in the vicinity of overhead power lines orother electric light or power circuits, or where it canfall into such power lines or circuits. When installingan outside antenna system, extreme care should betaken to keep from touching such power lines orcircuits as contact with them might be fatal.18. Overloading – Do not overload wall outlets, extensioncords, or integral convenience receptacles as this canresult in a risk of fire or electric shock.19. Object and Liquid Entry – Never push objects of anykind into this product through openings as they maytouch dangerous voltage points or short-out parts thatcould result in a fire or electric shock. Never spillliquid of any kind on the product.20. Servicing – Do not attempt to service this productyourself as opening or removing covers may exposeyou to dangerous voltage or other hazards. Refer allservicing to qualified service personnel.21. Damage Requiring Service – Unplug this product fromthe wall outlet and refer servicing to qualified servicepersonnel under the following conditions:a) When the power-supply cord or plug is damaged,b) If liquid has been spilled, or objects have fallen intothe product,c) If the product has been exposed to rain or water,d) If the product does not operate normally byfollowing the operating instructions. Adjust onlythose controls that are covered by the operatinginstructions as an improper adjustment of othercontrols may result in damage and will oftenrequire extensive work by a qualified technician torestore the product to its normal operation,e) If the product has been dropped or damaged in anyway, andf) When the product exhibits a distinct change inperformance – this indicates a need for service.22. Replacement Parts – When replacement parts arerequired, be sure the service technician has usedreplacement parts specified by the manufacturer orhave the same characteristics as the original part.Unauthorized substitutions may result in fire, electricshock, or other hazards.23. Safety Check – Upon completion of any service orrepairs to this product, ask the service technician toperform safety checks to determine that the productis in proper operating condition.24. Wall or Ceiling Mounting – The product should bemounted to a wall or ceiling only as recommended bythe manufacturer.25. Heat – The product should be situated away from heatsources such as radiators, heat registers, stoves, orother products (including amplifiers) that produceheat.Please, record and retain the Model name and serialnumber of your set shown on the rating label.Model Name. RCD-M33 Serial No.1. PRODUCTThis product complies with Part 15 of the FCCRules. Operation is subject to the following twoconditions: (1) this product may not cause harmfulinterference, and (2) this product must accept anyinterference received, including interference thatmay cause undesired operation.2. IMPORTANT NOTICE: DO NOT MODIFY THISPRODUCTThis product, when installed as indicated in theinstructions contained in this manual, meets FCCrequirements. Modification not expressly approvedby DENON may void your authority, granted by theFCC, to use the product.3. NOTEThis product has been tested and found to complywith the limits for a Class B digital device, pursuantto Part 15 of the FCC Rules. These limits aredesigned to provide reasonable protection againstharmful interference in a residential installation.This product generates, uses and can radiate radiofrequency energy and, if not installed and used inaccordance with the instructions, may causeharmful interference to radio communications.However, there is no guarantee that interferencewill not occur in a particular installation. If thisproduct does cause harmful interference to radio ortelevision reception, which can be determined byturning the product OFF and ON, the user isencouraged to try to correct the interference by oneor more of the following measures:• Reorient or relocate the receiving antenna.• Increase the separation between the equipmentand receiver.• Connect the product into an outlet on a circuitdifferent from that to which the receiver isconnected.• Consult the local retailer authorized to distributethis type of product or an experienced radio/TVtechnician for help.FCC INFORMATION(For US customers)CAUTION:TO REDUCE THE RISK OF ELECTRIC SHOCK, DONOT REMOVE COVER (OR BACK). NO USERSERVICEABLE PARTS INSIDE. REFER SERVICINGTO QUALIFIED SERVICE PERSONNEL.The lightning flash with arrowheadsymbol, within an equilateral triangle,is intended to alert the user to thepresence of uninsulated “dangerousvoltage” within the product’senclosure that may be of sufficientmagnitude to constitute a risk ofelectric shock to persons.The exclamation point within anequilateral triangle is intended to alertthe user to the presence of importantoperating and maintenance (servicing)instructions in the literatureaccompanying the appliance.CAUTIONRISK OF ELECTRIC SHOCKDO NOT OPEN