Denon RCD-M39 Service Manual

Also see for RCD-M39: Getting started guide Owner's manual Owner's manual Service manual Getting started

Contents

223. Cold start mode (initialization)(1) Plug AC cord into power outlet while pressing "SOURCE" and "8 / -" button same time on Main Unit.Initialize.I N I T I A L I Z EDefaultSOURCE DISCTUNER BAND EK:DAB, other FMTUNER frequency Minimum reception frequencyTUNER PRESET 0Set -/+ PRESETSDB OFFBASS 0TREBLE 0BLANCE CENTERDIMMER 100%VOLUME 8Clock E3:AM12:00, Other:0:00ALARM SOURCE DISCALARM ON E3:AM12:00, Other:0:00ALARM OFF E3:AM12:00, Other:0:00SPK OPTIMISE ONiPod MODE REMOTEAUTO STANDBY E2/EK:ON, E3:OFFDAB Module (EK) Initialzed ModuleProtection memory NO PROTECT※ The following settings are not initialized.• Laser ON TIME and Laser Current• Power supply abnormal flag(2) After initialization, the unit will start in normal mode (Power On).4. CD test mode(1) Plug AC cord into power outlet while pressing "Power operation (X)" and "SOURCE" button same time on Main Unit." 1 3 "0 0 C D T E S T M O D E(1, 3 flashing)(2) Move the slide to the initially set position (10 mm towards the outside from the innermost position).(3) Check by performing key input. Refer to 4.2q ～ 4.2y.(4) Cancel the mode by turning the power back on.※ Do not push the button without the explanation.4.1 Disc loading(1) Press the "5" button to open the tray.(2) Set a disc on the tray, then press the "5" button again to close the tray.(3) Move the slide to the initially set position (10 mm towards the outside from the innermost position) and stop in thisstatus.