30ENGLISHSetting the network [Network]nManual Settings1Press[MENU].Turns on the Menu settings mode and the Menu appears onthe display. (vpage 25 “Menu map”)2Useuitoselect“Network”–“Connection”–“Manualsetting”,thenpress[ENTER],<1/3ENTER>orp.3Useuito select “SSID”, then press[ENTER],<1/3ENTER>orp.4Useuiopto input the name of the wirelessnetwork(SSID),thenpress[ENTER]or<1/3ENTER>.• The types of characters that can be input are as shown below.G Upper case charactersHABCDEFGHIJKLMNOPQRSTUVWXYZGLower case charactersHabcdefghijklmnopqrstuvwxyzGSymbolsH! “ # $ % & ‘ ( )z+ , - . / : ; < = > ? @ [ \ ] ^ _ ` { | }˜GNumbersH0123456789(Space)5Useuito select “Security”, then press[ENTER],<1/3ENTER>orp.6Useuitoselectfollowingitems,thenpress[ENTER],<1/3ENTER>orp.•None: Select if not encrypted. Can also be used even withoutencryption, through we recommend encryption for improvedsecurity.•WEP / WPA(TKIP) / WPA(AES) / WPA2(TKIP) / WPA2(AES):Select the encryption method according to the encryption settingof the access point you are using.7Useuito input the “Key” (encryption key), thenpress[ENTER]or<1/3ENTER>.Enter the same encryption key as used for the access point.• When no security settings have been used in the Internetconnection settings, this step is not necessary.• When connecting to a “WEP” encrypted network, set the accesspoint “Default Key” to “1”.8Useito select “Connection” and press[ENTER],<1/3ENTER>orp.Network connection starts.• This unit performs automatic network setup due to the DHCPfunction.Last.fm DisplaySet whether or not to display Last.fm item on the menu.1Press[MENU].Turns on the Menu settings mode and the Menu appears onthe display. (vpage 25 “Menu map”)2Useuito select “Network” – “Last.fm Display”,then press[ENTER],<1/3ENTER>orp.“Last.fm Display” appears.3Useuito select “Display” or “Hidden”, thenpress[ENTER],<1/3ENTER>orp.Display: Last.fm items will be displayed.Hidden: Last.fm items will not be displayed.Button located on both the main unit and the remote controlBUTTONButton only on the main unitButton only on the remote control[BUTTON]Symbols used to indicate buttons in this manualup[ENTER][MENU]io/&5803,$%3&$&*7&33$%/pi<1/3ENTER>ou