Denon S-102 Owner's Manual

Also see for S-102: Product sheet Service manual Owner's manual Specifications Code List

Denon S-102 Owner's Manual Manual pdf 21 page image

Playback Remote Control Information TroubleshootingENGLISH Getting Started Connections SetupAUDIO SETUPMake settings for audio playback.F Menu screen Fa SPEAKER SETUPMake detailed speaker settings.• The volume can be adjusted between the range of –12dB to +12dB.• When “TEST TONE” was selected, the test tones are output inintervals of 4 seconds for the first two cycles, 2 seconds from thethird cycle on, in the order shown below.SubwooferFront left Front rightCHANNEL LEVELListening to the test tones at the listening position, adjust the levelof the speakers for the different channels so that the volume levelsounds the same from all speakers.DISTANCESet distance from listening position to speakers.s INPUT MODEMake input mode and decode mode settings for thissource.[Selectable items]AUTO : Detect type of digital input signal and decode and playautomatically.DTS : Decode and play only DTS input signals.PCM : Decode and play only PCM input signals.ANALOG : Play only signals from analog input.[Selectable items]DISTANCE : Select unit for distance.FRONT LCH : Set distance from listening position to front leftspeaker.FRONT RCH : Set distance from listening position to front rightspeaker.SUBWOOFER : Set distance from listening position to subwoofer.DEFAULT : Press the ENTER button to return to the default.[Selectable items]TEST TONE : Output test tone.FRONT LCH : Output test tone from front left speaker.FRONT RCH : Output test tone from front right speaker.SUBWOOFER : Output test tone from subwoofer.