Denon S-102 Owner's Manual

Also see for S-102: Product sheet Service manual Owner's manual Specifications Code List

Denon S-102 Owner's Manual Manual pdf 7 page image

Connections Setup Playback Remote Control Information TroubleshootingENGLISHCAUTION• Be sure to fasten the speaker cords to a wall, etc., toprevent people from tripping over them or otherwisepulling on them accidentally, causing the speakersystems to fall.• Be sure to check for safety after installing the speaker systems.Afterwards, perform safety inspections at regular intervals to besure there is no danger that the speaker systems will fall. DENONwill accept no responsibility for damages or accidents caused byinappropriate choice of the place of installation or improper installationprocedures.• Switching the input function when input terminals are notconnected.A clicking noise may be produced if the input function is switchedwhen nothing is connected to the input terminals. If this happens,either turn down the VOLUME control knob or connect componentsto the input terminals.• When watching TV broadcasts with the S-102’s power turned on,depending on the conditions of the TV broadcast's signals, stripedpatterns may appear on the picture. This is not a malfunction of theS-102 or the TV. Turn the S-102’s power off when watching TV.• Note that if a magnet or a piece of furniture or equipment usingmagnets is placed nearby, interaction with the S-102 could result incolor blotching on the TV.Other CautionsNOTE• This product uses a semiconductor laser. To ensure stable operation,it is recommended to use the product indoors at a temperature of 5°C (41 °F) ~ 35 °C (95 °F).b Noteb bbWallb Noteb bbWall(ADV-S102)(DSW-S102)Note:For proper heat dispersal, do not install this unit in a confinedspace, such as a bookcase or similar enclosure.Cautions on InstallationD The quality of the sound produced from the speaker is affectedby the size and type of the room, as well as by the method ofinstallation. Consider the points listed below before installing thespeaker.• Placing speakers on the same stand or shelf as the record playercould result in howling.• If there is a wall, glass door, etc., behind or to the sides of thespeakers, resonance and reflections can be prevented by using athick curtain, etc.• The speakers are of the shielded type. With some TVs, however,placing the speakers near the TV could cause color blotching on theTV's picture. If this happens, turn the TV’s power off, move it away,wait 15 to 30 minutes, then turn the TV’s power back on. If the colorblotching persists, move the speakers further away.• Mount on a wall sufficiently sturdy to bear the weight of thespeaker. Note that DENON will except no responsibility whatsoeverfor damages or accidents caused by the speaker falling.• To ensure safety, have a specialist install the speakers on the wall.• Be sure to fasten the speaker connection cables to the wall, etc.,so that you do not get your feet or hands caught in them, causingthe set to fall.• Place the subwoofer on a flat floor to prevent accidents due to thesubwoofer tipping over.• Do not place a record player, CD player or other such device on topof the subwoofer.• Do not set the subwoofer with the baffle surface against thefloor. Doing so will prevent you from achieving satisfactory soundeffects.Getting Started