18ENGLISHENGLISH[MENU/SET][CLOCK]ON/STANDBY9BAND88 9ON/STANDBY BANDTUNINGAbout the button names in this explanation< > : Buttons on the main unit[ ] : Buttons on the remote control unitButton name only :Buttons on the main unit and remote control unitUsing the timer functionPress and hold [MENU/SET].• “TIME Adj” is displayed.• The hour’s display flashes.Use 8 or 9 to set the hours to “PM 7”.• “7” flashes.Setting the current timePress [CLOCK].2Press [MENU/SET] simultaneously with the tone of atime casting, etc.• “TIME Adj” turns off.• The current time is displayed.631The S-81’s clock displays the time in the 12-hour mode.Example: To set the current time to “PM 7:30”Before setting the timerPress [MENU/SET].• The minute’s display flashes.4Use 8 or 9 to set the minutes to “30”.• “30” flashes.5• If [MENU/SET] is pressed before the time is set, the time settingmode is set.• If the current time has been set, it can be displayed by pressing[CLOCK].• In the standby mode, the current time can also be displayed bypressing [MENU/SET].NOTE:• The time cannot be set when in the standby mode. Turn on thepower first.¢ Types of timersThe S-81 has three timer functions.q Everyday timer:Use this to play at the set time every day.w Once timer:Use this to play once only at the set time.e Sleep timer:Use this to turn off the power after up to 90 minutes, set inintervals of 10 minutes.¢ Order of priority for the timers• If the times set for the three timers overlap, the sleep timer haspriority.• If the times set for the everyday and once timers overlap, the oncetimer has priority.¢ If there is a power cut• The current time setting is canceled. Turn the power on and resetthe current time.• The timer settings are cleared. Set the timer again.• The tuner’s presettings may be cleared. If so, perform thepresetting procedure again.NOTE:• If the current time is not set, the timer standby indicator “ ”will not light.• When the timer is set, the timer standby indicator “ ” lights.