Using the timer function Using the timer function20ENGLISHAbout the button names in this explanation< > : Buttons on the main unit[ ] : Buttons on the remote control unitButton name only :Buttons on the main unit and remote control unit[MENU/SET][SLEEP]988 9ENGLISH¢ Canceling the sleep timer:Press [SLEEP] repeatedly to select “OFF”.• The remaining time is displayed when [SLEEP] is pressed while thesleep timer is operating.• If [SLEEP] is pressed while the remaining time is displayed, “OFF” isselected. Reset the timer as desired.¢ If you do not want the timer to operate:Use 8 or 9 to turn off the timer standby indicator “ ”.After setting the timer at “Setting the everyday or once timer” (page 19), select the timer(s) you want to operate.Press [MENU/SET] twice.• The current settings are displayed.Use 8 or 9 to select the timer(s) you want tooperate.121 _ on / E _ on :1 _ off / E _ on :1 _ on / E _ off :1 _ off / E _ off : Neither the once nor the everyday timeroperates.Both the once and the everyday timersoperate.Only the everyday timer operates.Only the once timer operates.Operation of the everyday and once timersIf only the everyday timer is set, the display switches as followswhen 8 or 9 is pressed.If only the once timer is set, the display switches as followswhen 8 or 9 is pressed.1 _ off / E _ on 1 _ off / E _ off1 _ off / E _ off 1 _ on / E _ offSetting the sleep timerExample: Setting so that the power turns off in 80 minutes.Press [SLEEP] during playback.• The “SLEEP” indicator flashes.Press [SLEEP] repeatedly while the “SLEEP” indicatoris flashing to select “80”.• The “SLEEP” indicator stops flashing, remaining lit, after about5 seconds.The power is set to the standby mode after 80 minutes.12