Denon UD-M31 Operating Instructions Manual

Also see for UD-M31: Specification sheet Operating instructions Service manual

Contents

8ENGLISH!4 AM antenna terminal(ANTENNA TERMINAL AM)• Connect the AM antenna here.!5 FM antenna terminal(ANTENNA TERMINAL FM)• Connect the FM antenna here.!6 Digital output jack(DIGITAL OPTICAL OUT)• Digital data is output in optical form from this jack.!7 System connectors(SYSTEM CONNECTOR 1 and 2)• When connecting the D-M31 series in a system,connect these connectors to system connectorson other system components.(Use the system cords included with the othercomponents.)!8 Speaker terminals (SPEAKERS)• Use these to connect the speakers.!9 AC OUTLET• Use this when using this unit with the D-M31series.For connections, refer to “CONNECTIONS”.(100 W MAX.)@0 Power cord• Plug this cord into a wall power outlet.@1 PRE OUT terminal (SUB WOOFER)• Connector jack for subwoofer with built-inamplifier (super woofer), etc.@2 Analog output jacks• This is an output terminal for recording.@3 Analog input jacks(2) Rear Panel (3) DisplayThe selected functions, volume, reception band, receptionfrequency, time, and timer settings are displayed here.The following is displayed in the track number display in CDmode:• When the disc’s data cannot be read properly …………00• In stop mode ………………………Total number of tracks• In play and program modes …………………Track numberThe following is displayed in the time display in CD mode:• When the disc’s data cannot be read ………………00:00• In stop mode ……………………………Total playing time• In play and pause modes …Elapsed time for current trackThese display the FM reception mode.ST : This lights when a stereo program isreceived in the FM AUTO mode.MONO: This lights when a monaural program isreceived in the FM AUTO mode and whenthe BAND button is pressed, setting theFM MONO mode.AUTO : This lights when the BAND button ispressed, setting the FM AUTO mode.This lights whena station is tunedin properly.This lights whenSDB mode is on.This lights when thetone has beenadjusted or when inthe tone adjustmentstandby mode.The timer willoperate whenthis is lit.“P.SET” lights whenthe tuner presetnumber is displayed.This lights whensetting the timer.“TIMER” lights whenthe timer is set.This lights when thedisplay is set toclock mode.This flashes for approximately10 seconds when theMEMORY button is pressedwhile presetting stations.1 (the play indicator) lightswhen a disc is playing, and3 (the pause indicator)lights when pause mode isset.“RANDOM” lightsduring random play.This changes as follows each time the REPEAT button is pressed:1st press : RPT 1 (single-track repeat) is displayed and the numberof the track to be repeated on the display.2nd press : RPT ALL (1 disc all track repeat) is displayed.3rd press : Nothing is displayed.NOTE:• The timer standby mark (“ ”) does not light if the current time and the timer have not been set.“PROG” lights duringprogrammed playback.“EDIT” lights whenediting cassette tapes.Flashes when remotecontrol signals are received.This lights when the sleeptimer is operating.