- 152 -13.8. Management of Setting ValuesAll settings are managed with xml file (hereinafter referred to as settings file).When a settings file saved in the appropriate place is imported, the setting value definedin the settings file is reflected on the menu. Next time reading barcode is enabled, thesetting value is reflected on the device.The setting value set in the menu can also be exported to a file.Exporting contents set in one device and importing them in another device enables touse the same setting value.The setting file is operated from the barcode scanner setting menu. ImportSelects a setting file to be imported. ExportSelects a place where a setting file is exported. Reset to factory defaultsResets the setting contents to the factory default. Select [Resets to the factory defaults] and select [OK] on thesetting value initialization check dialogue. Then, the setting value resets to the factory default.13.8.1. Storing Set Value PermanentlyBy storing the setting file in the internal shared storage/StartupSettingsData/Setup/Barcode/ folder, the file canbe stored permanently without losing the setting contents after Enterprise Reset. The same setting contentscan be reflected on another device by exporting the contents set in one device, storing them in the abovedirectory of another device, and executing Enterprise Reset to the device.
