- 52 -6.1.6. Use of Static IP AddressBy default, the BHT is set to assign IP address using DHCP when it is connected to the WLAN network. TheBHT can also be set to connect to the network using the static IP address.1) Tap a available network.2) Tap Advanced options.3) Tap IP Settings and select Static in the pop-up menu.4) Enter IP address, Gateway, Network prefix length, DNS1 address and DNS2 address in the specifiedfield.5) Tap CONNECT.6.1.7. Connection Using WPSWPS enables the secure WLAN network easily. BHT supports WPS by pushing buttons.1) Tap Menu on the available network list screen. Select Advanced, and then select WPS PushButton.2) A dialog box indicating the remaining time to push WPS button on the router is displayed on the screen.3) A dialog box indicating the remaining time to push WPS button on the router is displayed on the screen.
