Denso BHT-500B User Manual

Contents

Denso BHT-500B User Manual Manual pdf 162 page image

145Barcode Handy Terminal4.5.14 Downloading/Uploading the System Message File(SYSTEM MESSAGE Menu)The system message file is a file (file name: “_B50MSG.FN4”) used by the system to display messagesssage file to the host computer and so on.(2 age file at another BHT. Uploading the System Message Fileessage settincomputer and so on. After uploading, delete the created system message file.system message fileReceive the system message file from the host computer and so on to which it was backed up, and afterand interface set at “[5] Setting theommunication environment” in section “4.5.5 System Environment Settings” are used when uploadingnd downloading.- Supplementsuch as “Shutdown in progress. Do not remove the battery.” or “Charge the battery!”.gs and upload it to the hostownloading/Uploading the System Message FileD(1) Upload the system me) Download the uploaded system messCreate a system message file based on the current system m Downloading thesetting the stored system messages, delete the received system message file.The communication parameters, communication protocol,caSystem messages are normally set when the BHT is shipped from the factory, andtherefore operation at this menu is unnecessary.-Use the following procedure to download and upload the system message file.1. Press the 6 key while holding down the SF key at the SYSTEM MENU.The SYSTEM MESSAGE menu displays as shown on the right.[1: DOWNLOAD]:Downloads the system message file.[2: UPLOAD]:Uploads the system message file.Refer to the following section for details of the above items.Press and hold the BS/C key to return to the SYSTEM MENU.